Posicionamiento dinámico - principios básicos. Las fuerzas y movimientos.. Dynamic positioning - basic principles. Forces and motions. A seagoing vessel is subjected to forces from wind, waves and current as well as from forces generated by the propulsion system. The vessels response to these forces, i.e. its changes in position, heading and speed, is measured by the position-reference systems, the gyrocompass and the vertical reference sensors. Reference systems readings are corrected for roll and pitch using readings from the vertical reference sensors. Wind speed and direction are measured by the wind sensors. The kongsberg K-Pos dynamic positioning control system calculates the forces that the thrusters must produce in order to control the vessel’s motion in three degrees of freedom - surge, sway and yaw - in the horizontal plane. Control principles The kongsberg K-Pos system is designed to keep the vessel within specified position and heading limits, and to minimise fuel consumption and wear and tear on the propulsion equipment. In addition, the kongsberg K-Pos system tolerates transient errors in the measurement systems and acts appropriately if a fault occurs in the thruster units. Para mas información: km.kongsberg/ks/web/nokbg0240.nsf/AllWeb/BD306BBB3E7DA73FC1256DAB00353083?OpenDocument Para mas información: dpmarine.dk/dynamic-positioning/
Posted on: Fri, 12 Sep 2014 13:39:39 +0000
Trending Topics
Recently Viewed Topics
© 2015