After doing a little work & clean up around the sink cabinet, I noticed that whoever took the old sink out & replaced it with this one that is too big for this counter area, cut the hole to big & tried to caulk it so it wouldnt show or leak, boy they messed this camper up trying to do work in it they have no knowledge about! When they cut the hole for the bigger sink, they cut most all of the support away trying to make it fit, it made the counter weak & sag.... The camper wasnt made to any high standards in the first place. The factory used paper wrapped balsa wood for the cabinets, a cheap 1/2 plywood & a very thin formica for the top. I had to make this right, there are two electrical outlets right where water couldve easily gotten to, still can I guess, from the way those fools did their handiwork. So, I made a new 1 1/4 Red Cedar countertop to match the other two tops, I made mine 10 times stronger & with a much better fit for the sink & stove top, I also moved the sink & stove top farther away from each other to give more counter space between them, every inch counts......
Posted on: Sun, 16 Nov 2014 04:09:01 +0000
Trending Topics
Recently Viewed Topics
© 2015