DEAR FREINDS VERY GOOD OPPORTUNITY FOR ALL PLEASE GO THROUGH THE DESCRIPTION & APPLY UR RELATED JOB ALL THE BEST......... Dear Candidate, URGENT REQUIREMENTS FOR NESMA & PARTNERS - SAUDI ARABIA Company Website: nesma-partners !!!INTERVIEW ON 14th OCTOBER, 2014 AT HYDERABAD!!! MANDATORY NOTE: PLEASE MENTION SAME FORMAT AS GIVEN BELOW IN EMAIL SUBJECT. EMAIL SUBJECT: - (NAME, POST, EDUCATION, EXP, MOBILE NO.,PLACE) IN EMAIL SUBJECT. (E.g.: XYZ, QC MANAGER, BECIVIL, 15YRS, 0123456789, HYD) Email CV: nesmasaudia@gmail (MENTION POST IN EMAIL SUBJECT) (IF DEGREE IS SAUDI ATTESTED PLEASE MENTION IN EMAIL SUBJECT) CANDIDATE MUST HAVE VALID PASSPORT FOR JOB APPLYING. NOTE: EMAIL WITHOUT MENTION POST IN SUBJECT WILL NOT BE ENTERTAIN ----------------------------------------------------------------------------------------------------------------------------------------------------- Mandatory Note: Register your Name and Mobile Number before attending the interview in below given address. PLEASE REPLY IN FOLLOWING FORMAT : -(EMAIL ID: nesmasaudia@gmail) NAME: POST APPLYING FOR: EDUCATION: EXP (INDIA): EXP (ABROAD): PRESENT LOCATION : PASSPORT READY(YES/NO) : PASSPORT NO : HIGHEST DEGREE : DEGREE ATTESTED ( WHICH COUNTRY SAUDI,DUBAI ETC...) : EXP SALARY(IN SR) : CONTACT NO. 2NOS. ----------------------------------------------------------------------------------------------------------------------------------------------------- EXPERIENCE IN OIL & GAS, MEP OR BUILDING CONSTRUCTION PROJECTS =============================================================== *QC MANAGER (CIVIL & MECHANICAL) - (10NOS) - (EXP 10 - 15YRS) - QUAL - (BE/BTECH - CIVIL/MECHANICAL/ELECTRICAL) - SAL NEG *QA/QC SUPERVISOR (CIVIL & INDUSTRIAL) - (10NOS) - (EXP 5 - 6YRS) - QUAL - (BE/BTECH - CIVIL/INDUSTRIAL) - SAL SR 4000 - 6000 *QA/QC SUPERVISOR (ELECTRICAL) - (20NOS) - (EXP 5 - 10YRS) - QUAL - (BE/BTECH - ELECTRICAL) - SAL SR 3500 - 5000 *QA/QC ENGINEER (CIVIL) - (51NOS) - (EXP 5 - 10YRS) - QUAL - (BE/BTECH - CIVIL) - SAL - SAL SR 4000 - 6000 *QA/QC CIVIL ENGINEER - (IN STRUCTURAL) - (10NOS) - (EXP 5 - 10YRS) - QUAL - (BE/BTECH - CIVIL) - SAL SR 4000 - 6000 *QA/QC ENGINEER (ELECTRICAL & INDUSTRIAL) - (10NOS) - (EXP 5 - 10YRS) - QUAL - (BE/BTECH - ELECTRICAL/INDUSTRIAL) - SAL - SR 3500 - 5000 *QA/QC ENGINEER (HVAC/PLUMBING) - (10NOS) - (EXP 5 - 10YRS) - QUAL - (BE/BTECH - MECHANICAL) - SAL - SR 3500 - 5000 *QA/QC ENGINEER (INDUSTRIAL INSTRUMENTATION)- (5NOS) - (EXP 5 - 10YRS) - QUAL - (BE/BTECH - INSTRUMENTATION) - SAL - SR 3500 - 5000 *QA/QC ENGINEER (PIPING) - (20NOS) - (EXP 5 - 10YRS) - QUAL - (BE/BTECH - MECHANICAL) - SR 5000 - 6000 *QA/QC ENGINEER (PAINTING/COATING)- (5NOS) - (EXP 5 - 10YRS) - QUAL - (BE/BTECH - MECHANICAL) - SAL - SR 3500 - 5000 *QA/QC ENGINEER/INSPECTOR (WELDING)- (25NOS) - (EXP 5 - 10YRS) - QUAL - (BE/BTECH - MECHANICAL) - SAL - SR 3500 - 5000 *SAFETY SUPERVISOR - (16NOS) - (EXP 5 - 10YRS) - QUAL - (GRADUATION+DIPLOMA IN HSE+NEBOSH OR IOSH OR OSHA AND SHOULD HAVE KNOWLEDGE IN JOB SAFETY ANALYSIS AND RISK ASSESSMENT) *SAFETY OFFICER - (160NOS) - (EXP 5 - 10YRS) - QUAL - (HIGH SCHOOL / DIPLOMA OR EQUIVALENT PROFESSIONAL DEGREE WITH MINIMUM OF TEN (3) YEARS OF DIRECT EXPERIENCE AS A SAFETY OFFICER. PLUS MUST HAVE OSHA/IOSH/NEBOSH ANY ONE CERTIFICATE AND DIPLOMA IN FIRE&SAFETY) JOB DESCRIPTION: JSA, TOOL BOX TALKS AND HAS KNOWLEDGE IN UNDERSTANDING SAFETY INSPECTIONS, CHECKLISTS AND WORK PERMIT SYSTEMS. *DOCUMENT CONTROLLER (QA/QC) ------------------------------------------------------------------------------------------------------------------------------------------------------------ JOB DESCRIPTION : QC ENGINEER / INSPECTOR MECHANICAL WELDING Responsible for UT/RT/MT/PT and Hardness Test and Radiography Film interpretation throughout the project.Review and checking of welding procedures. Conduct the procedure qualification test as per WPS.Organize and conduct the welders qualification test as per ASME Section IX and client specification.Check only approved electrodes, wires and gas are used.Control welding consumables and documents.Visual inspection of pipe fit up and welds joints. Monitor the performance of the welders on the basis of radiographic inspection and promoting corrective action when necessary.After completion of spool fabrication, checking the final dimension, material traceability, orientation and cleanliness.NDE inspection and pressure tests are carried out and documented in accordance with the approved procedures and QC plan for site activities.Collect inspection records and maintain and update the inspection and test status.Preparation of Quality Procedure ITP, WPS etc., Material Identification, verification of material test reports, visual inspection of weld joints, maintaining records of inspection, arrangements NDT as per the project requirements.Preparation of test package and final documentation. QC ENGINEER / INSPECTOR PAINTING & COATING Bachelors Degree/Diploma in Engineering.Certification in CSWIP BGAS or NACE-2.Must have at least 6 years experience out of which 3 years should be in inspection line with Oil & Gas, Petroleum / Petrochemical Industries.Throughout working knowledge and proven ability of all phases and types of critical coating applications and methods and recognized industry standards and critical coatings. QC ENGINEER MECHANICAL HVAC/PLUMBING Shall demonstrate a thorough working knowledge of codes such as SMCNA, Uniform Mechanical Codes, applicable NFPA, ASHRAE Handbooks, Uniform Plumbing Code, International Plumbing Code and/or equivalent standards.Ensure conformity of installation/erection in accordance with specifications, relevant drawings and/or approved method statement.Conduct Q.C. Inspection, quality control reporting and recording of the HVAC, fire protection, sewage (bio-treatment) and plumbing works, etc.Responsible for implementation of Project Quality Plan, Quality Control Procedures and Inspection & Test Plans, etc.Conduct pre-commissioning, testing and commissioning, reliability and performance tests for all HVAC system, fire protection and bio treatment equipment, etc.Implementation of quality management procedures as required ISO 9001:2000 standard.Conduct vendor inspection at manufacturers facility as required by the client.To oversee the Quality Assurance System of sub-contractors and ensure that they conform to specifications. QC ENGINEER ELECTRICAL / INDUSTRIAL ELECTRICAL Throughout working knowledge of National Electric Code/NFPA 70, IES or equivalent standard, electrical installation including materials, methods, specifications, and hazardous location identification for oil and gas or petrochemical industries. Analyzes applicable codes, standards and project contract documents and monitors construction activities to ensure compliance.Monitors and/or evaluates electrical tests and inspections such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required.Field checks installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed. Assures compliance with approved submittals.Monitors all electrical installations to assure circuitry, phasing, equipment and grounding adhere to construction documents and Company Electric Code requirements.Provides general inspection on all construction and subcontractor work to assure a safe and workmanlike operation.Verifies equipment settings, alignment, testing and energization requirements.Evaluates adequacy of Contractor Quality Control (CQC) programs. Monitors contractors compliance with approved Quality Control Plan. DOCUMENT CONTROLLER(QA/QC) Reports to the Project QA/QC Manager Ensure that all controlled Quality documents r elated to the Project are maintained to the latest issue, and that these documents are made available at all locations where operations essential to the effective functioning of the Quality Management System are performed. Verify that only the last revision drawings, submittals, etc. are distributed to all locations and involved parties concerned including sub contractors. Ensure that all obsolete documents shall be withdrawn and stamped Superseded if retained for record purposes.Maintain project drawing/documents distribution record Control & maintain the system for issuance recording / filing, tracking, Retrieval of documents like procedures, plans, QA/QC records, Specifications, drawings and related documents. Responsib ilities include record keeping, all documents such as specification procedures, inspection schedule and records, surveillance report, inspection release notice and quality records book with numbering system according to project filing procedure. Handling of all engineering documents. Controlling all records and sub-contractors documents. Prepare all documents based on the quality procedures for internal and external audit. Transmittal of drawings, quality procedures, related documentation to the concerned contractors, departments, vendors and client. Maintaining all correspondence and other transmittals from the Clients and other contractor / suppliers / vendors etc in a systematic way t o facilitate an easy referenc e at all time. Submitting techn ical documents for review and a pproval. Well aware of all typ es of quality documents like IT P, Checklist, RFI, method state ments, Nonconformance rep ort, Technical queries, Inspect ion assignment package, Dispos ition Report, Material Request , Technical Approval Request, H ydro test packages and other m iscellaneous project contract documents.Preparing and update of various logs and registers. FREE (FOOD OR ALLOWANCE+ACCOMMODATION+TRANSPORTATION+MEDICAL) + OT NOTE: PLEASE IGNORE THIS EMAIL IF IT IS NOT RELEVANT TO YOUR PROFILE. Address: HK.TRAVELS FIRST FLOOR, SUNDER SADAN BUILDING, , STREET NO; 5 HIMAYAT NAGAR, HYD - WHATUP NO. 8978953934/9032001981
Posted on: Wed, 08 Oct 2014 19:22:37 +0000
Trending Topics
Recently Viewed Topics
© 2015