DIY KAVORKIAN PROTOCOL *****Start Transmission*** 3-neck flask..addition funnel.. glass tubing and stoppers that you trust. 1) Aquire Prussian Blue pure pigment. 2) 36.7% Hydrochloric acid 3)Sodium Hydroxide Step 1-addition if concentrated hcl or sulfuric to the ferric ferrocyanide will liberate HCN. Place a molar amount in the bottom of flask..add acid via addition funnel. Use center neck. Equilize pressure with 2 1hole stoppers n tubing to funnel neck. Use glass or good tubing to channel HCN away. Remember that its Lighter then air..so a mesure will be trapped above acid in funnel at end 1) Pump into balloon. Large enough balloon will float. 2) Stirr into cold water forming hydrocyanic acid. U could build the KGB squirt gun. Leach gold from circuit boards..clean jewlery...acid etching. Just remember heat fluctuations liberates HCN. 3) If u got balls...and a escape requirenent a few good inhales should work fast. Kavorkuan style. 3) Do the stoichiometry And balance moles CN- ions at max yeild to Na + ions at ideal. ( Sub K here if desired) Bubble with stirring the gas thru the hydroxide sulution. U will eventually have a saturated aquous solution of sodium or pottasium cyanide. This is more stabke for storage and can be used later ti generate cyanic acid for gold or PGM complexing. If u have hollowpoints the mossod was fond of placing a filling of the sodium salt for enhanced errectivity 5Mg IV should result in a thanatological event.
Posted on: Tue, 09 Jul 2013 14:33:02 +0000
Trending Topics
Recently Viewed Topics
© 2015