Data Link Switching (DLSw) Definition – What does Data Link - TopicsExpress



          

Data Link Switching (DLSw) Definition – What does Data Link Switching (DLSw) mean? Data link switching (DLSw) is a tunnelling protocol used to direct non-routable (NetBIOS and DECs LAT), non –IP protocols (e.g., AppleTalk and IPX) across IP networks. These protocols include non-routable and non-IP based protocols like the IBM systems Network Architecture (SNA) or NetBIOS Frames (NBF). DLSw is a way of transporting SNA and network basic input/output (NetBIOS) traffic through an IP network. DLSw serves as an alternative to source-route bridging (transparent bridging), and carries local area network traffic over a wide area network by first encapsulating the traffic in TCP packets. Data Link Switching (DLSw) explained DLSw was first made available to the public in 1993 as IETF RFC 1434. It was further enhanced and republished in 1995 as IETF RFC 1795. DLSw was jointly developed by the Data-Link Switching Related Interest Group and the Advanced Peer-to-Peer Networking Implementors Workshop. The three primary functions of DLSw are 1. Mapping of local data-link control (DLC) connections to a DLSw circuit. 2. Terminating SNA DLC connections to help to reduce the chances of link-layer timeouts across WANs 3. Maintaining the Switch-to-Switch Protocol (SSP) between two DLSw routers or nodes Data link switching was originally created by IBM to add SNA support in multiprotocol routers and transport SNA and LAN traffic over a WAN by encapsulating the data in TCP packets. DLSw routers are called peers and the connections between them are called peer connections. DLSw works by establishing two TCP connections between two participating peers. The two peers then exchange capabilities such as DLSw version numbers, which are NetBIOS names known media access control addresses. There are three types of peers: • Active Peer: This peer establishes connections with other known peers. • Passive Peer: This peer accepts connections from other known peers. • Promiscuous Peer: This peer accepts any connection from any peer, whether known or not
Posted on: Mon, 07 Jul 2014 10:43:58 +0000

Trending Topics



Recently Viewed Topics




© 2015