Is the biochip the Mark of the Beast? The biochip technology was originally developed in 1983 for monitoring fisheries, it’s use now includes, over 300 zoos, over 80 government agencies in at least 20 countries, pets (everything from lizards to dogs), electronic branding of horses, monitoring lab animals, fisheries, endangered wildlife, automobiles, garment tracking, hazardous waste, and according to the experts – humans (which we’ll examine in detail later). To date, over 7 million animals have been chipped. The major biochip companies are A.V.I.D. (American Veterinary Identification Devices), Trovan Identification Systems, and Destron-Fearing Corporation. And according to most modern-day prophecy teachers. . . the implanted biochip is the soon-coming, 666: Mark of the Beast. This article contains 3 parts: Part 1: What is the biochip? Detailed description of a biochip and how it works. Part 2: Is the biochip the Mark of the Beast? Is the biochip the technology for 666: The mark of the Beast? What saith the scriptures. . . Part 3: Are humans being biochipped? Are humans currently being biochipped? Are there plans to biochip humans in the near future? Read what the experts say. Weve listed over 30 opinions from the experts Part 1: What is The Biochip Technology? What is a biochip implant? The current, in use, biochip implant system is actually a fairly simple device. Today’s, biochip implant is basically a small (micro) computer chip, inserted under the skin, for identification purposes. The biochip implant system consists of two components; a transponder and a reader or scanner. The transponder is the actual biochip implant. The biochip system is a radio frequency identification (RFID) system, using low-frequency radio signals to communicate between the biochip and reader. The reading range or activation range, between reader and biochip is small, normally between 2 and 12 inches. Note, we are only examining the implanted biochips, there are many other RFID microchip systems available. The transponder: The transponder is the actual biochip implant. It is a passive transponder, meaning it contains no battery or energy of its own. In comparison, an active transponder would provide it’s own energy source, normally a small battery. Because the passive biochip contains no battery, or nothing to wear out, it has a very long life, up to 99 years, and no maintenance. Being passive, its inactive until the reader activates it by sending it a low-power electrical charge. The reader reads or scans the implanted biochip and receives back data (in this case an identification number) from the biochip. The communication between biochip and reader is via low-frequency radio waves. The biochip-transponder consists of four parts; computer microchip, antenna coil, capacitor and the glass capsule. Computer Microchip: The microchip stores a unique identification number from 10 to 15 digits long. The storage capacity of the current microchips is limited, capable of storing only a single ID number. AVID (American Veterinary Identification Devices), claims their chips, using a nnn-nnn-nnn format, has the capability of over 70 trillion unique numbers. The unique ID number is etched or encoded via a laser onto the surface of the microchip before assembly. Once the number is encoded it is impossible to alter. The microchip also contains the electronic circuitry necessary to transmit the ID number to the reader. Antenna Coil: This is normally a simple, coil of copper wire around a ferrite or iron core. This tiny, primitive, radio antenna receives and sends signals from the reader or scanner. Tuning Capacitor: The capacitor stores the small electrical charge (less than 1/1000 of a watt) sent by the reader or scanner, which activates the transponder. This activation allows the transponder to send back the ID number encoded in the computer chip. Because radio waves are utilized to communicate between the transponder and reader, the capacitor is tuned to the same frequency as the reader. Glass Capsule: The glass capsule houses the microchip, antenna coil and capacitor. It is a small capsule, the smallest measuring 11 mm in length and 2 mm in diameter, about the size of an uncooked grain of rice. The capsule is made of biocompatible material such as soda lime glass. After assembly, the capsule is hermetically (air-tight) sealed, so no bodily fluids can touch the electronics inside. Because the glass is very smooth and susceptible to movement, a material such as a polypropylene polymer sheath is attached to one end of the capsule. This sheath provides a compatible surface which the bodily tissue fibers bond or interconnect, resulting in a permanent placement of the biochip.
Posted on: Wed, 03 Sep 2014 18:22:52 +0000
Trending Topics
Recently Viewed Topics
© 2015