L0001: Welcome to Elnec programmers control program PG4UW. L0002: Version 3.09h/10.2014. L0003: L0004: Today is 01.11.2014, 09:54:42. L0005: L0006: Processor: Intel (6/7/10) Frequency: 1995\2038,65 MHz L0007: CID: F48E-C564:00-21-00-D1-8B-E5::4E95E3C4 L0008: Operating system: Windows 7 x64 (v6.1, Build 7601: Service Pack 1). L0009: Physical RAM memory: 2046 MB L0010: L0011: L0012: >> 01.11.2014, 09:54:43 L0013: Default programmer: None. L0014: L0015: >> 01.11.2014, 09:54:44 L0016: Opened window Find programmer. L0017: L0018: >> 01.11.2014, 09:55:01 L0019: Scanning port(s) for BeeProg+ ................... found at port USB. L0020: Establishing connection ... (High Speed mode) done. L0021: Programmer serial number: 469-01406. L0022: L0023: L0024: L0025: >> 01.11.2014, 09:55:10 L0026: Buffer checksum type is set to Byte sum (x8), Straight L0027: Buffer block(s) excluded from checksum calculation: Disabled L0028: L0029: >> Log file created at 01.11.2014 09:55:10 L0030: Log file name: C:\Users\User\AppData\Roaming\Elnec\Pg4uw\report.rep L0031: Log file mode: Append L0032: L0033: Buffer operation Checksum, time elapsed: 16 ms L0034: L0035: Converting configuration info to new format... L0036: >> 01.11.2014, 09:55:16 L0037: Writing INI file (C:\Users\User\AppData\Roaming\Elnec\Pg4uw\Pg4uw-v3.ini) ... done. L0038: Conversion completed. L0039: L0040: >> 01.11.2014, 10:21:09 L0041: Selected device (by Select): Macronix MX25L1606E [SOP8-150] (Dual O). L0042: L0043: Buffer operation Checksum, time elapsed: 46 ms L0044: Buffer checksum in range of [0h..20003Fh]: 1FE03FC0h - Byte sum (x8), Straight L0045: L0046: >---------- Begin of options list ---------- (Direct device selection) L0047: L0048: |>---------- Device operation options ---------- L0049: | ---------- Addresses ---------- L0050: | Device start: 0000000000 h L0051: | Device end: 000020003F h L0052: | Buffer start: 0000000000 h L0053: | ---------- Insertion test and/or ID check ---------- L0054: | Insertion test: Enable L0055: | Device ID check error terminates the operation: Enable L0056: | ---------- Command execution ---------- L0057: | Erase before programming: Disable L0058: | Blank check before programming: Disable L0059: | Verify after reading: Enable L0060: | Verify: Once L0061: | ---------- Programming parameters ---------- L0062: | [x] Flash L0063: | [ ] OTP memory space L0064: | [ ] Status register L0065: | [ ] Lock-down secured OTP bit L0066: | ---------- Erase parameters ---------- L0067: | (o) All blocks L0068: | ( ) Selected block(s) L0069: |---------- Special options ---------- L0073: | ---------- View/Edit Status Register settings ---------- L0074: | SRWD: Disabled=0 L0075: | Protected memory: None L0076: | ---------- View Security Register settings ---------- L0077: | Secured OTP memory by customer: Non-Locked L0078: | Secured OTP memory by factory: Non-Locked L0079: | ---------- Erase parameters ---------- L0080: | Block(s) to erase (e.g. 0,3,5-7,... or all): 0 - 31(max.): L0081: |---------- Automatic YES! ---------- L0085: | Automatic YES!: Disable L0086: | Response time: Standard L0087: | ---------- L0088: | Device removal hold off time (in seconds): 2 L0089: | Device insertion complete time (in seconds): 5 L0090: | ---------- L0091: | Suspend on error: Enable L0092: | ---------- L0093: | NCP: L0094: | 01.11.2014, 10:21:13 L0102: Reading device: Macronix MX25L1606E [SOP8-150] (Dual O). L0103: Device insertion test ... L0104: Checking device ID ... L0105: Reading device ... L0106: Verifying device with buffer ... L0107: Reading device - done. L0108: Elapsed time: 0:00:06.6 L0109: L0110: Buffer operation Checksum, time elapsed: 63 ms L0111: Buffer checksum in range of [0h..20003Fh]: 1644BD54h - Byte sum (x8), Straight L0112: Statistics info: Success:1 Failure:0 Other failure:0 Total:1 L0113: L0114: Buffer checksum in range of [0h..20003Fh]: 1644BD54h - Byte sum (x8), Straight L0115: Saving file: C:\Program Files (x86)\Elnec_sw\Programmer\mx25l160.bin L0116: File format: Binary L0117: Save file successful! L0118: L0119: >> 01.11.2014, 10:22:03 L0120: Opened window Program? (parent window PG4UW v3.09h/10.2014 - universal control...). L0121: L0122: >> 01.11.2014, 10:22:08 L0123: Closed window Program? (by pressing Yes). L0124: L0125: >> 01.11.2014, 10:22:08 L0126: Programming device: Macronix MX25L1606E [SOP8-150] (Dual O). L0127: Buffer checksum in range of [0h..20003Fh]: 1644BD54h - Byte sum (x8), Straight L0128: Device insertion test ... L0129: Checking device ID ... L0130: Programming device ... L0131: Verifying device with buffer ... L0132: Programming device - O.K. L0133: Elapsed time: 0:00:05.2 L0134: Statistics info: Success:2 Failure:0 Other failure:0 Total:2 L0135: L0136: >> 01.11.2014, 10:22:20 L0137: Programming device: Macronix MX25L1606E [SOP8-150] (Dual O). L0138: Buffer checksum in range of [0h..20003Fh]: 1644BD54h - Byte sum (x8), Straight L0139: Device insertion test ... L0140: Checking device ID ... L0141: Programming device ... L0142: Verifying device with buffer ... L0143: Programming device - O.K. L0144: Elapsed time: 0:00:04.9 L0145: Statistics info: Success:3 Failure:0 Other failure:0 Total:3 L0146: L0147: >> 01.11.2014, 10:23:02 L0148: Loading file (from Load file dialog window): C:\Users\User\Desktop\143BF23\0143B.bin L0149: File format selection: automatic L0150: File format: Binary L0151: File loading successful. Bytes loaded 2294656 (00230380h). L0152: L0153: Buffer operation Checksum, time elapsed: 47 ms L0154: Buffer checksum in range of [0h..20003Fh]: 0FB3BB99h - Byte sum (x8), Straight L0155: L0156: >> 01.11.2014, 10:23:10 L0157: Opened window Program? (parent window PG4UW v3.09h/10.2014 - universal control...). L0158: L0159: >> 01.11.2014, 10:23:14 L0160: Opened window Device operation options (parent window PG4UW v3.09h/10.2014 - universal control...). L0161: L0162: >> 01.11.2014, 10:23:20 L0163: Closed window Device operation options (by pressing OK). L0164: |>---------- Device operation options ---------- L0165: | ---------- Addresses ---------- L0166: | Device start: 0000000000 h L0167: | Device end: 000020003F h L0168: | Buffer start: 0000000000 h L0169: | ---------- Insertion test and/or ID check ---------- L0170: | Insertion test: Enable L0171: | Device ID check error terminates the operation: Enable L0172: | ---------- Command execution ---------- L0173: |* Erase before programming: Enable L0174: | Blank check before programming: Disable L0175: | Verify after reading: Enable L0176: | Verify: Once L0177: | ---------- Programming parameters ---------- L0178: | [x] Flash L0179: | [ ] OTP memory space L0180: | [ ] Status register L0181: | [ ] Lock-down secured OTP bit L0182: |> 01.11.2014, 10:23:24 L0187: Opened window Device operation options (parent window PG4UW v3.09h/10.2014 - universal control...). L0188: L0189: >> 01.11.2014, 10:23:27 L0190: Closed window Device operation options (by pressing OK). L0191: |>---------- Device operation options ---------- L0192: | ---------- Addresses ---------- L0193: | Device start: 0000000000 h L0194: | Device end: 000020003F h L0195: | Buffer start: 0000000000 h L0196: | ---------- Insertion test and/or ID check ---------- L0197: | Insertion test: Enable L0198: | Device ID check error terminates the operation: Enable L0199: | ---------- Command execution ---------- L0200: | Erase before programming: Enable L0201: |* Blank check before programming: Enable L0202: | Verify after reading: Enable L0203: | Verify: Once L0204: | ---------- Programming parameters ---------- L0205: | [x] Flash L0206: | [ ] OTP memory space L0207: | [ ] Status register L0208: | [ ] Lock-down secured OTP bit L0209: |> 01.11.2014, 10:23:29 L0214: Closed window Program? (by pressing Yes). L0215: L0216: >> 01.11.2014, 10:23:29 L0217: Programming device: Macronix MX25L1606E [SOP8-150] (Dual O). L0218: Buffer checksum in range of [0h..20003Fh]: 0FB3BB99h - Byte sum (x8), Straight L0219: Device insertion test ... L0220: Checking device ID ... L0221: Erasing device ... L0222: Chip erase verify ... L0223: Device blank checking ... L0224: Programming device ... L0225: Verifying device with buffer ... L0226: Programming device - O.K. L0227: Elapsed time: 0:00:23.4 L0228: Statistics info: Success:4 Failure:0 Other failure:0 Total:4 L0229: L0230: ------------------------------------------------- L0231: -- Creating problem report file -- L0232: -- Date: 01.11.2014 10:24:23 -- L0233: ------------------------------------------------- L0234: L0235: |>---------- Device operation options ---------- L0236: | ---------- Addresses ---------- L0237: | Device start: 0000000000 h L0238: | Device end: 000020003F h L0239: | Buffer start: 0000000000 h L0240: | ---------- Insertion test and/or ID check ---------- L0241: | Insertion test: Enable L0242: | Device ID check error terminates the operation: Enable L0243: | ---------- Command execution ---------- L0244: | Erase before programming: Enable L0245: | Blank check before programming: Enable L0246: | Verify after reading: Enable L0247: | Verify: Once L0248: | ---------- Programming parameters ---------- L0249: | [x] Flash L0250: | [ ] OTP memory space L0251: | [ ] Status register L0252: | [ ] Lock-down secured OTP bit L0253: | ---------- Erase parameters ---------- L0254: | (o) All blocks L0255: | ( ) Selected block(s) L0256: |---------- Special options ---------- L0260: | ---------- View/Edit Status Register settings ---------- L0261: | SRWD: Disabled=0 L0262: | Protected memory: None L0263: | ---------- View Security Register settings ---------- L0264: | Secured OTP memory by customer: Non-Locked L0265: | Secured OTP memory by factory: Non-Locked L0266: | ---------- Erase parameters ---------- L0267: | Block(s) to erase (e.g. 0,3,5-7,... or all): 0 - 31(max.): L0268: |
Posted on: Sat, 01 Nov 2014 08:25:56 +0000
Trending Topics
Recently Viewed Topics
© 2015