(Long post - noob warning) Hey guys need help !! - last week had a lube mobile service my m35 stagea and the guy (whom I know) advised me to remove this breather looking setup on my m35. He assured me its doing nothing...he changed my plugs, did my oil and took breather setup out (which sat behind the passenger headlight next to the airbox) He plumbed the pipe coming from the back of the motor that fed this breather thing straight into the intake (after the afm peice). Since doing so i took it for a 10 minute drive and it pissed oil all over the motor/dump pipe. I found it all came from the dipstick. The dipstick seal isnt very good now but it popped off causing the leak - After a quick Google It looks like its probably an excessive crank case pressure? Anyone know about this breather/catch can setup on m35 (mine looked modded) and how I should re install it ? I Tried to fit it back how I remember it was plumbed up but after a degrease and test drive its still pissing oil from dipstick area. All over the motor, steering rack, dump pipe etc Appreciate all help to get this sorted.. the guy who did the service can only come back out during work hours and has to charge me lube mobile prices... Pics below shows my attempt of plumbing it back up which failed and oil went everywhere again
Posted on: Sun, 17 Aug 2014 06:14:18 +0000
Trending Topics
Recently Viewed Topics
© 2015