Mitech AC/DC 200a TIG/ARC, PULSE,HF Inverter, Foot Control Mitech’s AC/DC200P TIG is a robust, Mosfet inverter TIG welding machine with built-in MMA welding ability. With its large number of variable functions, the Mitech AC/DC200P allows complete control of your welding parameters on steel, stainless steel, copper, Nickel alloys and aluminium. The added pulse option with separate control of peak and base current, pulse width and frequency, provides you with perfect control. The AC option on the machine is complemented by AC balance control that allows you to set the welding parameters to achieve the maximum penetration or cleaning required for the specific application. Adjustable post flow and down slope ensure maximum quality of crater filling and protection when welding all materials. Duty cycle of 60%@200a continuous 100%@155a HF TIG starting makes it easy to establish an arc. Advanced pulse control , Pulsed TIG welding is extremely beneficial when welding thin gauge steel and s/steel. It allows the operator to tailor the amount of heat to the application, decreasing distortion and heat input. Pulsing can also be beneficial for novice TIG welders as it provides a rhythm for adding the filler rod. Thermal and voltage overload protection. Low noise fans 4m Tig Torch Tungstens (rear earth), Ceramics, Collets 3m Earth Lead 3m Twistlock arc lead Regulator Foot Control 230V Single Phase Rated input current 20.7a current 20-200a No load 56v Output 18v AC Pulse duty 20-80% Pulse duty 10-90% Post Gas 2-10s Up slope 0.5-2s Down slope 0-5s 2t/4t Efficiency 85% 20kg 540x233x498 Comes with A trolley, but no gas bottle. Tig rods-some alloy rods(2 different types), mild steel and hard facing rods Arc rods-some new boc smooth arc rods and an assortment of all sorts of rods that might be ok or might not be ok to use but a cook in the oven should bring most of them back up to good state. Can come with auto darkening helmet but I wouldn’t recommend its use with tig welding(for right price). Done Less than 3 hours work $1900ono
Posted on: Wed, 13 Aug 2014 05:33:56 +0000
Trending Topics
Recently Viewed Topics
© 2015