Ok I got a perplexing problem I hope someone has run into. On the ASC I have got some brake issues. When the car is cold it acts as it should brake pedal is perfect start and drive it the brake pedal starts to climb and the brakes start engaging while driving get it back to the shop let it cool and it is fine again. Something is causing it to hold pressure no loss of pedal. It is all new parts calipers rotors soft hoses pads all around are new yesterday it had some fluid coming out of the passenger caliper so we changed the caliper and bled it noticed no fluid came from the soft line. Still hung up so I changed the soft line thinking maybe it had collapsed after the hose change it bled off fine took her out for a drive seemed fine. This morning got in it drove it around the block the brakes started hanging again all 4 corners. So do you think proportioning valve or master cylinder booster? I am at a loss usually a master will bleed off when you hold your foot on the brakes. We did disconnect the master and adjusted then Rod back to make sure the pedal had free play. Sorry for the Book here is a picture of the car
Posted on: Sat, 17 Jan 2015 01:03:20 +0000
Trending Topics
Recently Viewed Topics
© 2015