Ordinary combustibles[edit] Ordinary combustible fires are the - TopicsExpress

Ordinary combustibles[edit] Ordinary combustible fires are the most common type of fire, and are designated Class A under both systems. These occur when a solid, organic material such aswood, cloth, rubber, or some plastics[1] become heated to their ignition point. At this point the material undergoes combustion and will continue burning as long as the four components of the fire tetrahedron (heat, fuel, oxygen, and the sustaining chemical reaction) are available. This class of fire is commonly used in controlled circumstances, such as a campfire, match or wood-burning stove. To use the campfire as an example, it has a fire tetrahedron—the heat is provided by another fire (such as a match or lighter), the fuel is the wood, the oxygen is naturally available in the open-air environment of a forest, and the chemical reaction links the three other facets. This fire is not dangerous, because the fire is contained to the wood alone and is usually isolated from other flammable materials, for example by bare ground and rocks. However, when a class-A fire burns in a less-restricted environment the fire can quickly grow out of control and become a wildfire. This is the case when firefighting and fire control techniques are required. This class of fire is fairly simple to fight and contain—by simply removing the heat, oxygen, or fuel, or by suppressing the underlying chemical reaction, the fire tetrahedron collapses and the fire dies out. The most common way to do this is by removing heat by spraying the burning material with water; oxygen can be removed by smothering the fire with foam from a fire extinguisher; forest fires are often fought by removing fuel by backburning; and an ammonium phosphate dry chemical powder fire extinguisher (but not sodium bicarbonate or potassium bicarbonate both of which are rated for B-class[2] fires) breaks the fires underlying chemical reaction. As these fires are the most commonly encountered, most fire departments have equipment to handle them specifically. While this is acceptable for most ordinary conditions, most firefighters find themselves having to call for special equipment such as foam in the case of other fire. Flammable liquid and gas[edit] A CO 2 fire extinguisher rated for flammable liquids and gasses These are fires whose fuel is flammable or combustible liquid or gas. The US system designates all such fires Class B. In the European/Australian system, flammable liquids are designated Class B, while burning gases are separately designated Class C. These fires follow the same basic fire tetrahedron (heat, fuel, oxygen, chemical reaction) as ordinary combustible fires, except that the fuel in question is a flammable liquid such as gasoline, or gas such as natural gas. A solid stream of water should never be used to extinguish this type because it can cause the fuel to scatter, spreading the flames. The most effective way to extinguish a liquid or gas fueled fire is by inhibiting the chemical chain reaction of the fire, which is done by dry chemical and Halonextinguishing agents, although smothering with CO2 or, for liquids, foam is also effective. Halon has fallen out of favor in recent times because it is an ozone-depleting material; the Montreal Protocol declares that Halon should no longer be used. Chemicals such as FM-200 are now the recommended halogenated suppressant. Electrical[edit] Electrical fires are fires involving potentially energized electrical equipment. The US system designates these Class C; the Australian system designates them Class E. This sort of fire may be caused by short-circuiting machinery or overloaded electrical cables. These fires can be a severe hazard to firefighters using water or other conductive agents: Electricity may be conducted from the fire, through water, to the firefighters body, and then earth. Electrical shocks have caused many firefighter deaths. Electrical fire may be fought in the same way as an ordinary combustible fire, but water, foam, and other conductive agents are not to be used. While the fire is or possibly could be electrically energized, it can be fought with any extinguishing agent rated for electrical fire.Carbon dioxide CO2, FM-200 and dry chemical powder extinguishers such as PKP and even baking soda are especially suited to extinguishing this sort of fire. PKP should be a last resort solution to extinguishing the fire due to its corrosive tendencies. Once electricity is shut off to the equipment involved, it will generally become an ordinary combustible fire. In Europe Electrical Fires are no longer a class of fire as electricity can not burn. The items around the electrical sources may burn. By turning the electrical source off, the fire can be fought by one of the other class of fire extinguishers. Metal[edit] This section does not cite any references or sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (January 2013) Certain metals are flammable or combustible. Fires involving such are designated Class D in both systems. Examples of such metals include sodium, titanium,magnesium, potassium, uranium, lithium, plutonium, and calcium. Magnesium and titanium fires are common. When one of these combustible metals ignites, it can easily and rapidly spread to surrounding ordinary combustible materials. With the exception of the metals that burn in contact with air or water (for example, sodium), masses of combustible metals do not represent unusual fire risks because they have the ability to conduct heat away from hot spots so efficiently that the heat of combustion cannot be maintained—this means that it will require a lot of heat to ignite a mass of combustible metal. Generally, metal fire risks exist when sawdust, machine shavings and other metal fines are present. Generally, these fires can be ignited by the same types of ignition sources that would start other common fires. Water and other common firefighting materials can excite metal fires and make them worse. The NFPA recommends that metal fires be fought with dry powder extinguishing agents. Dry powder agents work by smothering and heat absorption. The most common of these agents are sodium chloride granules and graphite powder. In recent years powdered copper has also come into use. Some extinguishers are labeled as containing dry chemical extinguishing agents. This may be confused with dry powder. The two are not the same. Using one of these extinguishers in error, in place of dry powder, can be ineffective or actually increase the intensity of a metal fire. Metal fires represent a unique hazard because people are often not aware of the characteristics of these fires and are not properly prepared to fight them. Therefore, even a small metal fire can spread and become a larger fire in the surrounding ordinary combustible materials. Only dry powder should ever be used to extinguish a metal fire. Cooking oils and fats (kitchen fires)[edit] Laboratory simulation of a chip panfire: a beaker containing wax is heated until it catches fire. A small amount of water is then poured into the beaker. The water sinks to the bottom and vaporizes instantly, ejecting a plume of burning liquid wax into the air. Fires that involve cooking oils or fats are designated Class K under the American system, and Class F under the European/Australasian systems. Though such fires are technically a subclass of the flammable liquid/gas class, the special characteristics of these types of fires, namely the higher flash point, are considered important enough to recognize separately.Saponification can be used to extinguish such fires, as can dry-powder, CO2 or, for small fires, mechanical smothering. Appropriate fire extinguishers may also have hoods over them that help extinguish the fire. See also[edit] • Fire extinguisher References[edit] 1. Jump up^ USDA Forest Service Specification for Water Enhancers (Gels) for Wildland Firefighting, Page 35. June 1, 2007. Retrieved 2008-11-24. 2. Jump up^ Label for Kidde sodium bicarbonate fire extinguisher. Material safety data sheet available in portable document format atkidde/utcfs/ws-384/Assets/KIDDE_RegularDryChemical.pdf External links[edit] • Classification of Portable Fire Extinguishers, Occupational Safety and Health Administration • Evacuation Plans and Procedures eTool, Occupational Safety and Health Administration • Information on Fire Extinguishers, The Fire Safety Advice Centre • For Fire Extinguishers, Wollongong Extinguisher Service-Australia