QATAR CHEMICAL (QCHEM - qchem.qa) OPENINGS QCHEM will conduct interview and test on last week of January 2015 in Jakarta for the following positions 1. MECHANICAL TECHNICIAN - 10 Positions Work Experience: • Minimum work experience seven years as an Mechanical Technician in a Petrochemical, Oil & Gas plant. • Ability to perform work normally performed by this craft independently. • Ethylene/Polyethylene plant experience will be an added advantage. Job Description (but not limited to): • Ability to read drawings and instructions, to install/remove, overhaul rotating equipment or parts. • Ability to set, align and install/remove rotating equipment or parts. • Ability to troubleshoot and analyze equipment problems, and to request required spare parts. • Ability to overhaul and repair rotating equipment i.e. compressors, blowers, pumps and fans, mixers, mechanical seals etc. • Carryout day to day plant maintenance work independently. • Implement mechanical preventive maintenance, follow established procedures and record all results. • Carry out maintenance jobs on static equipment, valves, pipelines, exchangers, vessels, columns etc. • Ability to drive forklifts as per Q-Chem regulations is preferred. • In addition to his normal jobs, he should assist and participate in other maintenance activities. • Will be subject to in-house training on safety, quality improvement to participate in Q-Chem continuous improvement. • Understands and apply plant safety standards and maintenance procedures while performing work. • Knowledge of materials commonly used in chemical service: Pipes : Size, schedule and metallurgy Valves : Size, type, trim and metallurgy Gaskets : Size, type, and installation Fittings : Sizes, rating and type • Reading of drawings and instructions and layout/installation of piping. • Operate workshop mechanical equip i.e. grinding machine, power saw, etc. 2. INSTRUMENT TECHNICIAN - 2 Positions Minimum Work Experience : • 3 years work experience as an Instrument Technician in a petrochemical, Oil, and Gas plant with experience in maintenance, commissioning, loop testing and start-up activities. Job Requirements (but not limited to) : • Understand and follow plant safety standards and procedures. Be familiar with typical petrochemical plant safety hazards. • Understand and follow standard maintenance procedures. • Understand and follow manufacturers troubleshooting and maintenance procedures. • Correctly use and care for test and calibration equipment. • Follow good housekeeping practices. • Troubleshoot and repair pneumatic, electronic and smart instruments. • Troubleshoot and repair PLCs, and TMR systems (Triconex). • Calibrate pneumatic, electronic and digital instruments. • Overhaul control valves and other instruments. • Read and understand P&ID, Loop, Logic and Electrical drawings. • Follow ISO procedural requirements for calibration and record keeping. • Tune feedback control loops. • Follow plant preventive maintenance procedures. 3. ELECTRICAL TECHNICIAN - 6 Positions Minimum Work Experience • Minimum 5 years work experience as an Electrical Technician in a petrochemical, Oil and Gas plant. • Able to perform work in this type of facility independently. Job Requirements (but not limited to) : • Follow plant safety standards and procedures. Be familiar with typical petrochemical plant safety hazards. • Follow standard maintenance procedures. • Follow manufacturers troubleshooting and maintenance procedures. • • Correctly use and care for test and calibration equipment. • Implement good housekeeping practices. • Use standard instruments to measure voltage, amperage, speed, rotation and vibration. • Troubleshoot and repair ground faults. • Repair electrical motors up to 500 HP including replacement of bearings and seals, installation of motor and connection of starters and circuits. • Maintenance of battery standby systems (UPS) and inverters. • Read electrical, relay logic and schematic drawings and use these to troubleshoot and repair circuits. • Installation of conduit, enclosures, wiring, connections and controls up to 480 V for new construction. • Repair and maintain cathodic protection systems, Overhead cranes, • • • • Automatic Overhead Doors and other electrically operated equipment. Splice cables up to 500 MCM. • Read and interpret schematics for power distribution systems up to 33 • KV including repair and maintenance of 10 MVA transformers. • Work at elevated heights. • In addition to his normal jobs, he should assist and participate in other maintenance activities. 4. VALVE TECHNICIAN - 2 Positions Work Experience : • Minimum five years experience as a valve technician or pipe fitter in a Petrochemical, Oil & Gas plant. • Minimum of three years of employment in a Safety Relief Valve Repair Shop. • Experience in various duties involving servicing and setting various types of Pressure Relieving Devices • Experience in operating and maintaining lapping machine and reading optical flats • Ability to perform work typical by this craft independently. • Completion of at least one safety valve manufacturers training course (i.e. Anderson Greenwood, Consolidated, Farris, Crosby etc.) or alternatively a minimum of five years of employment in a Safety Relief Valve Repair Shop. • Experience certificate from process and Construction Company. Job Description (but not limited to) : • Reading of drawings and instructions and layout/installation of piping. • Ability to work on static equipment. • Basic knowledge of rotating equipment, Valves, etc. • Knowledge of inspection of Pressure relieving devices and spares. • Good knowledge of hydro testing of pipe spools, vessels and hoses • Knowledge of materials commonly used in chemical service: Pipes : Size, schedule and metallurgy Valves : Size, type, trim and metallurgy Gaskets : Size, type, and installation Fittings : Sizes, rating and type • Ability to work at elevated heights. • Able to inform supervisor concerning changes in drawings while performing work in order to update the drawings and technical acceptance. • Have excellent knowledge of piping and related specifications, i.e. schedule, rating etc. • Operate workshop mechanical equip i.e. grinding machine, power saw, etc. • Operate all types of hoses and pneumatic tools. • In addition to his normal jobs, he should assist and participate in other maintenance activities. • Will be subject to in-house training and toolbox meetings on safety, quality improvement tools to participate in Company continuous improvement. • Understand and apply the plant safety standards and maintenance procedures while performing work. 5. CRANE OPERATOR - 4 Positions Educational Qualification: • Fluent knowledge of English language (Speak, Read and Write). • Graduate certificate from High School. • Trade training certificate from any recognized institution. • Be physically and medically fit with regard to eyesight, hearing, reflexes and climbing in and out of various equipments. Work Experience & Certification Requirements : • Valid Qatari driving license for Crane, Med Truck, Forklift & Car. • Valid Third party certificate for Mobile crane operator. • Valid Third party certificate for Forklift operator. • Valid Third party certificate for Lorry Loader crane operator. • Minimum 3rd party training three days for fresh hands in country and two days for the refreshers. • Minimum five years work experience in a similar capacity from lifting and transporting company in operation of fork lift, trucks, self loader etc. • Should have worked as a crane operator at least five years with different types crane RT, AT, & TM). • Should have work experience for different crane capacity staring from 3T up to 90T or higher. Job Description (but not limited to) • Apply plant safety standards and maintenance procedures while performing the work. • Drive all types of automobiles and mobile heavy equipment as per Q-Chem regulations. • Operate heavy equipment delivered by contractor in a safe and efficient manner. • Should know all signals and rigging standards. • Equipment operators shall be responsible for ensuring that his equipment is functioning correctly, and properly maintained, and checked against an approved checklist each and every time the equipment is operated. • Check that the equipment being used is in good condition and certified for use 6. TRAILER DRIVER - 25 Positions Job Requirements (but not limited to) • Physically capable of lifting 25kg over head • Physically capable of climbing ladders, climbing in and out of various vehicles (forklifts, trucks, cranes etc.) • Physically capable of working outdoors in temperatures approaching 120oF • Use dock yard equipment to move full and empty sea containers to and from designated areas safely • Team member for hydrocarbon and sulfur bulk loading • Perform record keeping of container movements onto pre-designated forms if required • Assist with physical inventory and trouble shooting of missing containers • Perform other duties in addition to regular duties as required • Support a working environment of empowerment that takes responsibility for personal quality of work • Operate Q-Chem dock operations within the culture, laws and environment of Qatar • Responsible for all aspects of team safety within dock work area • Maintain effective team communications • Perform other duties in addition to regular duties as required All candidates will receive attractive salary with free food, accommodation, transportation and Overtime wages. Please be informed that all candidates MUST have sufficient ENGLISH, there will be WRITTEN TEST and INTERVIEW Send your resume to recruitment@binamandiri Subject : QCHEM - (positions Name). Closing date 31 December 2014. Further information please contact Mr. Aris Permadi at 0817177431 / 085233177431 / 0341347474
Posted on: Wed, 17 Dec 2014 14:28:25 +0000
Recently Viewed Topics
© 2015