eHam.net Classifieds Icom IC-R75 Communications Receiver with ... eham.net Icom IC-R75 Communications Receiver in mint condition. UT-106 DSP unit has been installed. Receiver is also equipped with Synchronous AM Detection, ... The Icom IC-R75-22 receiver continues the proud tradition of the earlier R70 and R71A models. With full coverage from 30 kHz to 60 MHz; all longwave, medium wave and shortwave frequencies are supported plus extended coverage to include the 6 meter amateur band. Some of innovative features of the R75 include: FM Mode Detection (but not the FM broadcast band), Twin Passband Tuning, Two Level Preamp, 99 Alphanumeric Memories, four Scan Modes, Noise Blanker, Selectable AGC (FAST/SLOW/OFF), Clock-Timer, Squelch, Attenuator and backlit LCD display. Tuning may be selected at 1 Hz or 10 Hz steps plus there is a 1 MHz quick tuning step plus tuning Lock. The R75 exhibits very impressive and very linear sensitivity throughout shortwave. Superior dynamic range insures the handling of both weak and strong signals. The front-firing speaker provides solid, clear audio. The back panel includes a Record Output jack and Tape Recorder Activation jack (both 3.5mm mini). There are both Hi-Z and Lo-Z antenna inputs. The R75 is an excellent single sideband (SSB) receiver. The supplied 2.1 kHz SSB filter is suitable for utility, amateur, or broadcast SSB. However, two optional CW/SSB filter positions are also available (one per I.F.). Click here to view filter chart. The built in 24 hour clock timer is very versatile. You can program the radio to come on and power off at specific times. There is also a sleep function that will turn the radio off after a set period that can be set from 1 minute to 23 hours and 59 minutes. The R75 comes with the AD-55S-12 external 100-240 VAC 50-60 Hz to 15 VDC power supply adapter. The R75 is not CE certified. Optional filters do not require soldering. The UT-106 DSP Unit is currently installed by Icom and included in the radio. _
Posted on: Wed, 08 Oct 2014 23:19:36 +0000