*how to know if your remote control is still working*Sometim es your remote control just stops working and you feel like banging the hell out of it to get it working (i know how frustrating that is) dont,just take some time to test if the remote control still works at all. And sometimes you might go to an electronic store to get a remote control this will be useful to you if you want to make sure it works. TESTING REMOTE CONTROLS WITH PHONES REQUIREMENTS: A camera phone (it doesnt matter if its a 0.5megapixel camera or a 100megapixel camera phone as far as the camera works) Note:The remote controls make use of infra- red lights to send signals to the corresponding appliance,infra -red lights are not visible to the human eye but are clearly visible if seen through a camera. METHOD: (1)Open your phones camera (2)Set the remote control in front of it as you would if you wanted to operate your appliance remotely. (3)press any buttons on the remote repeatedly. (4)if you see blue lights flashing on the remotes bulb through your phones camera that means the remote works if no lights at all,then get it repaired either by changing the batteries and cleaning the batteries contact points with the remote or just get a new one. TESTING REMOTES WITH RADIO: Radios can also detect infra-red signals just like they detect radio waves. REQUIREMENTS: A Radio that has AM(amplitude modulation)/ SW (short wave) mode. METHODS: (1)Turn on your radio (2)set it to either AM mode or SW mode (3)place your remote close to the radios antenna (4)press any buttons on the remote (5)if you hear beeps on your radio then the remote works if you dont at first try tuning the radio to a different frequency if you still dont hear beeps then the remote doesnt work. LIKE AND SHARE TO YOUR FRIENDS.. #OPRIGADO
Posted on: Sat, 09 Nov 2013 11:25:51 +0000
Trending Topics
Recently Viewed Topics
© 2015