300Mbps Wireless N 802.11 Wifi Range Router Repeater Extender Expander UK/EU/US Plug + WPS Button Product Introduction: The Wireless-N Repeater is mainly used for providing free WiFi service in big area such as factory , community , office or home etc. It complies with the IEEE 802.11n standard with wireless transmission speeds of up to 300Mbps. easy to extends the range of your wifi network, no worry about the obstcal weaken the wifi signal, Feel free to access wireless network via your tablet pc, laptop, smart phone anywhere. It has 2dBi ceramic chip Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature. It also works well with other 802.11g and 802.11n protocol wireless products. Features: Upgrad 1.3V, support WPS. Extend the wireless coverage in all WLAN networks. Access to the Internet for computers located on the edge or outside of the range of your access point. Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards. Provides up to 300Mbps transmission rates. Support 2.4 GHz WLAN networks. Maximum WLAN security with WPA2, WPA and WEP (128/64). Software wizard for simple setup. 2dBi antennas integrated. Support Wireless Repeater Mode and Standard AP Mode. Provides one 10/100Mbps Auto-Negotiation Ethernet LAN ports. Specification: Version: 1.3 Color: White / Black Condition: 100% brand new. Frequency range: 2.4-2.4835GHz. Wireless transmit power: 14 ~17 dBm (Typical) Power supply unit: 100V-240V AC Wireless Signal Rates With Automatic Fallback: 11n: Up to 300Mbps(dynamic), Modulation Technology: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM Receiver Sensitivity: 300M: -68dBm@10% PER / 150M: -68dBm@10% PER 108M: -68dBm@10% PER / 54M: -68dBm@10% PER / 11M: -85dBm@8% PER / 6M: -88dBm@10% PER / 1M: -90dBm@8% PER Product dimensions: 11 * 6 * 7cm Product weight: 98g Networking cable:1m/3ft. Package size: 22 * 14.5 * 7cm Note: If you need to reset the Wi-Fi Repeater, you need press and hold the reset button inside the tiny hole for 10 seconds until Application: Setting up a Wireless Infrastructure Network, For a typical wireless setup at home: Wireless Repeater Mode: You will need WiFi AP/Router internet access, just plug the wifi extender to a power slot, after configration to be an access point: Wireless ap Mode: You will need broadband Router internet access, Connect the wifi repeater to your rounter /switch with RJ-45 Cable: Package List: 1 PCS Wireless Wifi Extender Repeater 1.3V with UK Plug. 1 PCS RJ-45 networking cable. 1 PCS 1 x user manual.
Posted on: Sat, 25 Oct 2014 12:53:50 +0000
Trending Topics
Recently Viewed Topics
© 2015