Description: Brand Name: Walkera Item Name: QR X350 Pro Receiver: RX703a Main Controller: DEVO-M Transmitter: DEVO 10 white edition Battery: 11.1V 5200mAh LIPO Gimbal support: G-2D Camera: FPV iLook+ camera Walkera QR X350 Pro Main rotor diameter: 556mm Main rotor blade length: 206mm Lenght: 289mm Width: 289mm Height: 200mm Brushless motor spec: WK-WS-28-008C Brushless ESC spec: WST-15A(G/R) Fight time: 25 minutes Control distance: up to 2 km / 1.24 miles Quick and easy assembly. Completely Ready to Fly. Gimbal ready for camera anti-vibration 2-axis stabilization (new Walkera G-2D). First Person View. FatShark glass compatible. WIFI option for smart phones. GPS and “One Key” Return to Home functions. GPS Auto Pilot functions. Failsafe auto RTH and Land. Low voltage protection. Easy to see with LEDs. Balance charger with world compatible wall adapter. Devo 10 White Edition Control distance: 2KM Encoder: 10-channel micro computer system. Frequency: 2.4GHz DSSS Output power: ≤10mW Current drain: 200mA(100mW) Transmitter power supply: NiMH 12V 1600mAh Output pulse: 1000-2000ms The DEVO-10 adopts 2.4GHz Direct Sequence Spectrum(DSSS) technology and features automatic ID binding and ID assignment.It can also be customizedly set as fixed ID code. USB online update makes you always enjoy the lates programme. Adjustability of hi-frequency output power enjoys more personality and friendly environment. Wireless data transmission between two DEVO-10 Helps experience the training function. Up to 30-model data can be saved. DEVO-10 adjusting the gyro sensitivity makes hovering flight and fancy flight in an easy way. Shape design accords with human engineering and provides comfortable holding. Both the length and tension of the sticks can be adjustable. DEVO-10 can be freely switched among Mode1,2,3,4. DEVO-10 is suitable for helicopter and airplane,In the helicopter mode there are three flight modes ,each of which can be freely set and its parameters can be personalizedly adjusted to meet the requirement for F3C or 3D aerobatic flight. G-2D Brushless Gimble Operating voltage: DC7.4-28V (recommended 12V,3S Lipo battery) Opetating current: 200mA-500mA(depends on the motor power and voltage supplied) Opetating temperature: -15℃-65℃ Sensor technology: 3-axis MEMS gyro and accelerometer Max angular rate: 2000°/sec Max acceleration: 16g Frenquency: 2000Hz Motor driven frequency: 46 KHz(no noise smoothing drive) Control accuracy: 0.1° Control range: -45°-45°(roll)/-135°-90°(tilt) Applicable camera: Gopro Hero3 Size: 100mm x 94.5mm x 84mm(LxWxH) Weight: 120g(Camera not included) Gopro Hero3 AV Line out Power voltage compensation available. Support motor drive side short circuit protection. Support initial roll and tilt customed. Support stick rate mode and position mode. Regular receiver accepted. RX-LCD5802 5.8GHz LCD Diversity Receiver Monitor Bulit-in 5.8Ghz Dual diversity receiver automatically for best reception. Built-in high performance Li-Polymer battery:2450mAH/7.4V. Work status OSD display: RSSI indication, battery indicator;channel indication A key to automatic signal search Support Chinese and English menu Size: 180mmx120mmx50mm (Note: Sunshield height 28mm) Working Voltage: DC 7~16V Power consumption: 650 mA@ 12V (Max) Working temperature: -10℃~ +65℃ FPV iLook+ cameraDescription: Brand Name:Walkera Item Name: iLook+ HD Camera Low latency and long range FPV Support 5.8 Ghz wireless video link Support output Micro SD card Support G-2D and G-3D brushless gimbal Quick FPV assembly with built-in video transmitter Compatible with Fatshark and Walkera DEVO F7 Video Resolution HD 1920*1080P Video Frame Rate 30FPS Video Format MOV Video Compressing Format H.264 Image Pixel 300 Resolution 4032*3024 Pixel Video Format MJPG Standby Power Loss 1.33W Working Power Loss 1.9W Supply Voltage 3.7V-5V Working Temperature -10~+70℃ Lens Spec 1/3’’ Lens Angle 170°(MAX) Weight 125g Manual of QR X350PRO Package Included: 1 x Walkera QR X350 Pro RC Quadcopter 1 x Walkera Devo 10 transmitter 1 x RX703a Receiver 1 x RX-LCD5802 1 x G-2D camera gimbal 1 x FPV iLook+ camera 1 x FPV transmitter mount 1 x battery 1 x charger Prijs: €845,95 (De levertijd bedraagt uiterlijk 14 dagen maar in verreweg de meeste gevallen moet u rekening houden met een levertijd van 7 dagen)
Posted on: Mon, 22 Sep 2014 12:42:32 +0000
Trending Topics
Recently Viewed Topics
© 2015