How to Update Galaxy Y with iOS based iROM custom firmware 1. Download the update file from here and place the same on your computer. 2. Don’t unzip the downloaded file. 3. Connect your Galaxy Y with your computer. 4. Use the USB cable for establishing the connection. 5. Now, on the SD card folder make a new folder named clockworkmod. 6. Enter the clockworkmod folder and there make a new one nambed backup. 7. Up next, extract the update file you have downloaded on the backup folder from the SD card. 8. Unplug the USB cable and disconnect your smartphone from computer. 9. Turn off your phone. 10. Wait a few seconds and then enter your Galaxy Y into recovery mode. 11. From the recovery mode menu select “backup and restore”. 12. Up next choose “restore”. 13. Select the backup file with the date and time. 14. Finally return to main menu of recovery. 15. And select “reboot system now”. 16. If your Y will get stuck in a boot loop, enter recovery again and select “wipe data factory reset” and “wipe cache partition”. Good, now that should be all. Your Samsung Galaxy Y has been updated with the ICS based and iOS themed iROM custom firmware. Test the new software, see how it performs, play with the apps, themes and features and note down the results. Then, return here and use the comments area for sharing your thoughts with us. if you want to check more details about this ROM, don’t hesitate and check our source by going to this page. If there was something that hasn’t worked as explained, tell us and we will try to assist you as soon as possible. Also, stay close for further step by step guides and Android related tips tricks and news.
Posted on: Tue, 08 Jul 2014 11:49:00 +0000