Motorcycle Intelligent Security Switch Alpha Version 0.05 My progress so far on the project. I am still in development phase but, this one is the candidate for the beta release of the prototype. What you see in the video is my development rig. Upon power up, simple system diagnostic runs. You can see in the video that LEDs light in turn then a short beep. Then the system wait for an RFID card. The card has been recorded with a valid key that this system expects. The first card is a valid. The system acknowledges by lighting up the green LED and with some series of short beeps. The blue LED is the simulation output. This output will give the signal for the motorcycle to let the authorized user to starts the bike. Second card simulates ang invalid card. Yellow LED lights up and a series of long beeps is heard. This goes on until the valid card is found. Next thing to do is to design the circuit for the motorcycles start control and assemble this system into casings which I will install in the motorcycle. I also need to optimize my code to free up memory so I can incorporate other codes in the future. With the development platform I am using, I am limited to 30KB size of code. Thank you for watching. Sorry for the noise in the background. At this stage, Id like to thank the following people... My inspiration, you know who you are. My development financial sponsor: Ian Christopher Banabana My production sponsor: Oggie Avecilla My Rouser electrical teacher: Noel Panlilio Nieva
Posted on: Sat, 10 Jan 2015 06:14:37 +0000
Trending Topics
Recently Viewed Topics
© 2015