One way to categorize the different types of computer network designs is by their scope or scale. For historical reasons, the networking industry refers to nearly every type of design as some kind of area network. Common examples of area network types are: LAN - Local Area Network WLAN - Wireless Local Area Network WAN - Wide Area Network MAN - Metropolitan Area Network SAN - Storage Area Network, System Area Network, Server Area Network, or sometimes Small Area Network CAN - Campus Area Network, Controller Area Network, or sometimes Cluster Area Network PAN - Personal Area Network DAN - Desk Area Network LAN and WAN were the original categories of area networks, while the others have gradually emerged over many years of technology evolution. Note that these network types are a separate concept from network topologies such as bus, ring and star. See also - Introduction to Network Topologies LAN - Local Area Network A LAN connects network devices over a relatively short distance. A networked office building, school, or home usually contains a single LAN, though sometimes one building will contain a few small LANs (perhaps one per room), and occasionally a LAN will span a group of nearby buildings. In TCP/IP networking, a LAN is often but not always implemented as a single IP subnet. In addition to operating in a limited space, LANs are also typically owned, controlled, and managed by a single person or organization. They also tend to use certain connectivity technologies, primarily Ethernet and Token Ring. WAN - Wide Area Network As the term implies, a WAN spans a large physical distance. The Internet is the largest WAN, spanning the Earth. A WAN is a geographically-dispersed collection of LANs. A network device called a router connects LANs to a WAN. In IP networking, the router maintains both a LAN address and a WAN address. A WAN differs from a LAN in several important ways. Most WANs (like the Internet) are not owned by any one organization but rather exist under collective or distributed ownership and management. WANs tend to use technology like ATM, Frame Relay and X.25 for connectivity over the longer distances. LAN, WAN and Home Networking Residences typically employ one LAN and connect to the Internet WAN via an Internet Service Provider (ISP) using a broadband modem. The ISP provides a WAN IP address to the modem, and all of the computers on the home network use LAN (so-called private) IP addresses. All computers on the home LAN can communicate directly with each other but must go through a central gateway, typically a broadband router, to reach the ISP.
Posted on: Sun, 21 Jul 2013 09:24:57 +0000
Trending Topics
Recently Viewed Topics
© 2015