So it begins...Day 1 I started today working on the car. Turned on heater in garage, keeps it about 50* if outside is below 32* and warmer if above. First goal was to jack up car to view damage if possible Next remove mufflers Next to remove half shafts Time 3 hours . One problem was not being able to rotate wheels more than 1 / 4 turn. That made unbolting haft shafts difficult because of small turns of wrench at odd angles on u-joint nuts. There is little doubt that my rear end is dead..... Now what to do next. Carrier bolts from cross member will never come out. It will be very difficult to unbolt the rear from carrier as there is no room to get at top bolts. My sombreros are shot (48 years old) the only way I will get the rear out of the car is to take off the cross member with the rear end. All the components (Strut rods bushing shot) , springs, drive shaft, have to be take off to drop the rear. I am on my back doing this. Any suggestion on my next days work will be welcome. I am soaking all in penetrating oil . Here some pictures of todays work
Posted on: Tue, 30 Dec 2014 02:40:22 +0000
Trending Topics
Recently Viewed Topics
© 2015