Trick #1 Looketh over there, ha ha, madeth thou look, so endeth - TopicsExpress



          

Trick #1 Looketh over there, ha ha, madeth thou look, so endeth the trick. Well here is trick number 2 for you guys/gals that have upgraded your rear axles to a 5x4.5 bolt pattern and have the drums from your factory Mopar with a early 5x4 pattern. There is no need to to get rid of the drums unless you want to upgrade your rears to disc. But for those wanting to retain the rear drum and keep a factory look, its easy!!! All you have to do is a little math and you can keep those rear drums. Using trig to calculate your bolt pattern, mark the locations on the drum. Then if you have a drill press or are lucky enough to have a bridgeport mill equipped with a D.R.O., drill out your locations to the correct hole size. Voila!! Easy solution. For added strength to the drum you could weld washers on each hole that the new studs will go through.
Posted on: Sun, 26 Jan 2014 04:02:00 +0000

Trending Topics



Recently Viewed Topics




© 2015