Troubleshooting tip: Ever seen this message on an E3 system? OUTPUT FILE AM-50 #02-A It appears on an E3 system on the LCD ...try the following tips: It could be that Circuit A had to much of a load on it and that amp failed to activate or it was activated but shutdown due to the overload of the amp circuit, or one of the speakers is defective. There are many reasons for it. Does the system clear after reset? if so it could be due to field issues. If it did not clear, check the D/C voltage on that amp circuit, you should get 1.2 Vdc in normal standby mode and 5 Vdc he has a short on the amp. Check those voltages with wires on terminals first then again with the EOL resitor on terminals but no field wiring.
Posted on: Wed, 04 Sep 2013 17:16:05 +0000
Trending Topics
Recently Viewed Topics
© 2015