You need to add one of these to your wish list: Universal Shaft System: AERA-vator Our products deliver results and lower your equipment cost by increasing versatility with interchangeable shafts and seeder options. The AERA-Vator’s vibrating tines deliver results without the extra work of traditional aerification and the fractured soil creates the ideal seedbed, making this a multifunctional machine that can be used in many applications. Vibrating tines loosen the soil all around and underneath each tine, fracturing the soil with 9 holes per square foot. Better subsurface aerification due to total fracturing of the soil – no holes are “punched” into the surface. No cores or plugs mean less post-aerification cleanup. Aerating dry soil reduces the expense of pre-irrigating; in fact, the harder the soil, the better the AERA-Vator performs. Swing-hitch allows easy turns while in use. Bonus: The Universal Shaft System Frame can be fitted with the AERA-Vator, AERA-Slicer and Multi-tine shafts for additional versatility to manage all areas of turf maintenance. Widths: 40”, 60” and 80” (available with or without seeder). Seed placement can be changed from front to rear depending on application, and a ground drive allows variable ground speeds for all terrain. Single pass seedbed preparation (in most conditions) while seeding. Ability to overseed and primary seed with the same machine. Two-in-one patented feed wheels for metering both large and small seed varieties. This allows accurate calibration with large and small seed sizes without adding a separate small seed box. All units come with a calibration catch tray to collect the seed for accurate calibration. The catch tray is secured on the front of the seed box when not in use. Accurate exposure of seed flutes are visually measured by raising the easy access wind deflector. Micro-seed calibration adjustments are made using the adjusting screw to align flute exposure. Feed wheels are spaced approximately 4” apart for uniform seed placement using 15 outlets for the UA-60 and 20 outlets for the UA-80 Potential uses include aerating/seeding high traffic areas with the AERA-Vator. Use the Slicer Shaft to reduce heat stress and reduce water run off with no surface disruption. The Multi-tine is used in all areas for seeding or incorporating top-dressing. Industry Uses: The AERA-Vator [uss] can be used for aerification on golf courses, sports fields and grounds, for landscaping needs, turf farms, and equestrian tracks and grounds.
Posted on: Mon, 08 Dec 2014 16:41:19 +0000
Trending Topics
Recently Viewed Topics
© 2015