how to use ANY dongle! 1.0 Satellite signal and RS232 cable connection 1.1 Install dish to right data satellite.( W3A ,NSS6 ,etc, ) Connect dish signal to Dongle’s LNB IN port; 1.2 If dongle have SD card, insert SD card to front panel SD socket. 1.3 Use packaged RS232 cable to Connect Dongle with the receiver (blue color or point marked connecter should put on Dongle).Receiver must have Y4/Twin protocol and function be activated. 1.4 Power on adaptor and connect to DC+12V port. 2.0 LED display function: 2.1 LOCK LED：（Must connect RS232 cable） Red : data signal not lock; Green : data signal locked. 2.2 STB LED Keep off or keep On: RS-232 port Y4/Twin protocol communication fail Blinking: RS-232 port Y4/Twin protocol communication succeed; 3.0 Waiting for Authorize: If all connection right and power on the Dongle, it will takes 5-30 minutes to wait for dongle be authorized. During the authorize waiting time, dongle will work as demo status(3 minutes work then stop, turn off and turn on power will again work 3 minutes then off). If this dongle not registered or expired, then after 20 times power on and power off, dongle will stop work even power off and power on again. When waiting the authorization, plz keep dongle power on and dish connected even the dongle is not working( maximum need wait 20 minutes to be authorized ). After authorization, enjoy it.
Posted on: Mon, 23 Sep 2013 17:04:27 +0000
Trending Topics
Recently Viewed Topics
© 2015