ELECTRICIAN JOB DESCRIPTION • READ AND INTERPRETED ELECTRICAL, MECHANICAL AND ARCHITECTURAL DRAWING AND ELECTRICAL CODE SPECIFICATION TO DETERMINE WIRING LAYOUTS • CUT, THREADED, BEBDED, ASSEMBLED AND INSTALLED CONDUITS AND OTHER TYPES OF ELECTRICAL CONDUCTOR ENCLOSURES AND FITTINGS... • PULLED WIRE THROUGH CONDUITS AND HOLES IN WALLS AND FLOORS • POSITIONED, MAINTAINED AND INSTALLED DISTRIBUTION AND CONTROL EQUIPMENT SUCH AS SWITCHES, RELAYS, CIRCUIT BREAKER PANELS AND ENCLOSURE • INSTALLED, REPLACED, MAINTAINED AND REPAIRED ELECTRICAL SYSTEMS AND RELATED ELECTRICAL EQUIPMENT • INSTALLED DATA CABLING • SPLICED, JOINED AND CONNECTED WIRE TO FORM CIRCUITS • TESTED CIRCUITS TO ENSURE INTEGRITY AND SAFETY • INSTALLED AND MAINTAINED FIBRE OPTIC SYSTEMS WELDER JOB DESCRIPTION • READ AND INTERPRETED BLUEPRINTS OR WELDING PROCESS SPECIFICATIONS • OPERATED MANUAL OR SEMI-AUTOMATIC WELDING EQUIPMENT TO FUSE METAL SEGMENTS USING PROCESS SUCH AS GAS TUNGSTEN ARC WELDING (GTAW), GAS METAL ARC WELDING (GMAW), FLUX-CORED ARC WELDING (FCAW), PLASMA ARC WELDING (PAW), SHIELDED METAL ARC WELDING (SMAW), OXY-ACETYLENE WELDING (OAW), RESISTANCE WELDING AND SUBMERGED ARC WELDING (SAW) • OPERATED MANUAL OR SEMI-AUTOMATIC FLAME-CUTTING EQUIPMENT • OPERATED BRAZING AND SOLDERING EQUIPMENT • OPERATED METAL SHAPING MACHINES SUCH AS BRAKES, SHEARS AND OTHER METAL STRAIGHTENING AND BENDING MACHINES • REPAIRED WORN PARTS OF METAL PRODUCTS BY WELDING ON EXTRA LAYERS. • SPECIALIZED INCERTAIN TYPES OF WELDING SUCH AS CUSTOM FABRICATION, SHIP BUILDING AND REPAIR, AEROSPACE WELDING, PRESSURE VESSEL WELDING, PIPELINE CONSTRUCTION WELDING, STRUCTURAL CONSTRUCTION WELDING, OR MACHINERY AND EQUIPMENT REPAIR WELDING PLUMBER JOB DESCRIPTION: • STUDIED THE BUILDING PLANS, DESIGN AND SPECIFICATIONS TO DETERMINE THE LAY-OUT FOR THE PLUMBING AND OTHER MATERIALS • LAY-OUT, LOCATE AND MARK THE POSITIONS FOR CONNECTION AND FIXTURES • CHIPPED AND CUT HOLES THROUGH WALLS AND FLOORS TO ACCOMMODATE PIPES • SELECTED THE TYPE AND SIZE OF PIPE REQUIRED AND MEASURE, CUT, THREAD, BEND, CLAMP, SOLVENT CEMENT OR SOLDER PIPE... • ASSEMBLED AND INSTALLED VALVES AND FITTINGS • JOINED PIPE SECTIONS AND INSTALLED SUPPORT TO SECURE THEM IN POSITION • TESTED PIPE SYSTEM FOR LEAKS • INSTALLED UNDERGROUND STORM SANITARY, SEWERS AND WATER PIPING SYSTEM • COMPLETED INSTALLATION OF FAUCETS, SINKS, TUBS AND WATER CLOSET • INSTALLED WATER HEATER AND WATER CONDITIONERS • INSTALLED PLUMBING ON RESIDENTIAL HOUSES UNDER CONSTRUCTION • INSTALLED PLUMBING ON COMMERCIAL, INSTITUTIONAL, INDUSTRIAL OR PUBLIC BUILDINGS • REPAIR AND RETROFIT EXISTING PLUMBING SYSTEM • INSTALLED WATER COOLER SYSTEM TILE SETTER JOB DESCRIPTION: • FIXED, RECTIFY SURFACE TO BE TILED • INTERPRETED AND EXECUTED BLUE PRINTS OF PLAN • ESTABLISHED LAY-OUT FOR ACHIEVING BEST PATTERN MATCHING DIFFERENT SPACES • PREPARED AND MEASURED AND MEASURED THE SURFACE TO BE COVERED... • CUT AND TRIM TILES TO FIT AROUND OBJECTS AND OPENINGS • MIXED AND APPLY ADHESIVES SUCH AS MORTAR,CEMENT,MASTIC OR EPOXY OVER SURFACE • SET AND POSITION TILES ACCORDING TO DESIGN PATTERNS USING TOOLS LIKE CHALK, STRAIGHT EDGE OR STRING LINES • FINISHED GAPS WITH VARIETY OF GROUTS AND SEALERS • CREATED COMPOSITE SURFACES USING DECORATIVE AGGREGATES • INSTALLED MARBLE AND GRANITE TILES, CUT, SHAPE AND POLISH • REPLACED AND REPAIR CRACKED AND BROKEN TILES • PREPARED COST ESTIMATES AND BILL OF MATERIALS • DESIGNED ARTISTIC MURALS AND MEDALLIONS INSULATOR • APPLIED THERMAL AND ACOUSTICAL INSULATION MATERIALS SUCH AS CALCIUM SILICATE, GLASS FOAM, ... MINERAL WOOL, STYROFOAM AND FIBERGLASS TO VARIOUS STRUCTURES SUCH DUCT PIPING, HEAT EXCHANGERS, TANKS AND VESSELS • UNDERSTOOD DRAWINGS, PLANS AND SPECIFICATIONS TO DETERMINE THE INSULATION REQUIREMENT • PRESCRIBED THE AMOUNT AND TYPE OF INSULATION TO BE INSTALLED AS WELL AS THE METHOD OF SECURING THE INSULATION SUCH AS SPRAYING, PINWELDING, WIRING, PASTING, STRAPPING AND TAPING ACCORDING TO THE TYPE OF SURFACE, WHETHER OR NOT THE EQUIPMENT IS COLD OR HOT, INSIDE, THE TYPE OF USE OF THE SAID EQUIPMENT • CALCULATED THE MEASUREMENT AND CUT THE INSULATING MATERIAL AND COVERINGS TO THE REQUIRED SHAPE AND DIMENSION • FITTED INSULATION AROUND OBSTRUCTION OR SHAPE INSULATION MATERIALS AND PROTECTIVE COVERINGS • INSTALLED VAPOR BARRIERS AND FINISHED INSULATED SURFACES BY APPLYING METAL CLADDING, CANVAS, PLASTIC SHEETING OR CEMENT • REPAIRED EXISTING INSULATIONS AND LEAKS • REMOVE OR SEAL OFF OLD ASBESTOS INSULATIONS • PERFORMED OTHER WORKS ASSIGNED AS NEEDED WELDERS... Welders performed some or all of the following duties: • Read and interpreted blueprints or welding process specifications • Operated manual or semi-automatic welding equipment to fuse metal segments using processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux-cored arc welding (FCAW), plasma arc welding (PAW), shielded metal arc welding (SMAW), oxy-acetylene welding (OAW), resistance welding and submerged arc welding (SAW) Operated manual or semi-automatic flame-cutting equipment • Operated brazing and soldering equipment • Operated metal shaping machines such as brakes, shears and other metal straightening and bending machines • Repaired worn parts of metal products by welding on extra layers. • specialized in certain types of welding such as custom fabrication, ship building and repair, aerospace precision welding, pressure vessel welding, pipeline construction welding, structural construction welding, or machinery and equipment repair welding WELDERS... Welders performed some or all of the following duties: • Read and interpreted blueprints or welding process specifications • Operated manual or semi-automatic welding equipment to fuse metal segments using processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux-cored arc welding (FCAW), plasma arc welding (PAW), shielded metal arc welding (SMAW), oxy-acetylene welding (OAW), resistance welding and submerged arc welding (SAW) Operated manual or semi-automatic flame-cutting equipment • Operated brazing and soldering equipment • Operated metal shaping machines such as brakes, shears and other metal straightening and bending machines • Repaired worn parts of metal products by welding on extra layers. • specialized in certain types of welding such as custom fabrication, ship building and repair, aerospace precision welding, pressure vessel welding, pipeline construction welding, structural construction welding, or machinery and equipment repair welding HEAVY EQUIPMENT TECHNICIAN/ HEAVY DUTY MECHANIC (OFF ROAD) JOB DESCRIPTION • HEAVY EQUIPMENT TECHNICIANS MAINTAINED, REPAIRED, AND OVERHAULED HEAVY VEHICLES AND INDUSTRIAL EQUIPMENT MAINTENANCE AND REPAIR OF VEHICLES AND EQUIPMENT MAY INCLUDE: • INTERNAL COMBUSTION ENGINES AND COMPONENTS, BOTH STATIONARY AND MOBILE • TRACKED EQUIPMENT, COMMONLY CALLED CRAWLER TRACTORS • EARTH MOVING EQUIPMENT RUBBER-TIRED EQUIPMENT, COMMONLY CALLED TRACTORS • ON-HIGHWAY AND OFF-HIGHWAY MOTOR VEHICLES, COMMONLY CALLED TRUCKS • TOWED ON-HIGHWAY AND OFF-HIGHWAY VEHICLES, COMMONLY CALLED TRAILERS IN GENERAL, HEAVY EQUIPMENT TECHNICIANS • INTERPRETED WORK ORDERS AND TECHNICAL MANUALS • KEPT EQUIPMENT CLEANED, LUBRICATED AND MAINTAINED • DIAGNOSED FAULTS OR MALFUNCTIONS • ADJUSTED EQUIPMENT AND REPAIRED OR REPLACED DEFETIVE PARTS, COMPONENTS OR SYSTEMS • TESTED REPAIRED EQUIPMENT FOR PROPER PERFORMANCE AND ENSURE THAT THE WORK DONE MEETS MANUFACTURERS SPECIFICATIONS AND LEGISLATED REGULATIONS • WROTE SERVICE REPORTS PIPEFITTER ... JOB DUTIES: • Read and interpreted client and company supplied construction fabrication drawings and specifications • Laid out, assembled, fabricated, maintained and repaired piping systems which carry water, steam, chemicals or fuel used in heating, cooling, lubricating and other processes • Laid out, assembled, fabricated, maintained and repaired pressurized piping systems • Hydrot... ested and installed fabricated pipe spools within structural steel modular assemblies, adding designed supports as required • Maintained all tools, work area and equipment in a clean and orderly fashion • Trained and competent on the use of all equipment required to carry out this trade • Able to red-line update drawings to an as-built condition • Followed various company policies and procedures
Posted on: Fri, 17 Jan 2014 05:38:19 +0000
Trending Topics
Recently Viewed Topics
© 2015