FOR SALE: HYDROCARBON COMMODITIES SUCH AS D2-DIESEL AND CRUDE OIL: FROM RUSSIA, NIGERIA, AND GULF COUNTRIES 1. CRUDE OIL A - COMPONENT - RESULT 1. Ash content not more % 0.14 2. Mass fraction of sulphur, Low sulphur residual oil 0.1-0.5 3. Temperature of the flash, not less ºC In the closed crucible 65 In the open crucible 110 min 4. The temperature of solidification, not higher ºC 25 5. Kinematics viscosity at 50ºC 118 max 6. Water content 0.5% 7. Mechanical impurities Lower than 0.1% 8. Acidity Lower than5mgKOH/100ml 9. Alkalinity Nil 10. Gross Calorific Value Kcal/kg/ Kj/kg Min 9200/41300 11. Density at 15.0 deg. C kg 0.89-0.92 12. Hydrogen Sulfide Content (H2S) pom 0.5 max 13. Carbon Residual Lower than 7% 14. Vanadium (V) ppm 23 15. Aluminum (Al) ppm 5 16. Silicon (Si) ppm 12 17. Nickel (Ni) ppm 29 18. Aspartames m/m 3.6% 19. Distillation @4 mm Hg Extracted to 760 mm Hg Initial Boiling Point deg. C 216 5% Recovered deg. C 259 10% Recovered deg. C 310 20% Recovered deg. C 358 30% Recovered deg. C 445 40% Recovered deg. C 502 50% Recovered deg. C 534 60% Recovered deg. C 538 75% Recovered deg. C 545 80% Recovered deg. C - 90% Recovered deg. C - Final boiling point deg. C 550 Percent Recovered vol. 78% Residue vol. 22% Total Nitrogen m/m 0.192% 20. Sodium (Na) ppm 15 B -COMMODITY 180 OR 380 FUEL OIL SPECIFICATION(180) Density at 15℃ ≥0.955 KIN. VISCOSITY AT 50℃ ≥200 SULPER %MASS ≥1.2 FLASH POINT (PMCC) ℃ ≥65 POUR POINT ℃ ≥18 WATER DISTALATION %VOL ≥1 CARBON RESIDUE %MASS ≥8 VANADIUM MG/KG ≥30 AI+SILICON MG/KG ≥20 NICKEL MG/KG ≥20 SODIUM MG/KG ≥20 ASPHALTENES ≥1.5 SPECIFICATION (280) Density at 15℃ ≤0.97 KIN. VISCOSITY AT 50℃ ≤300 SULPER %MASS ≤3 FLASH POINT (PMCC) ℃ ≥65 POUR POINT ℃ ≥-3 WATER DISTALATION %VOL ≤1 CARBON RESIDUE %MASS ≤11 VANADIUM MG/KG ≤150 AI+SILICON MG/KG ≤30 NICKEL MG/KG ≤20 SODIUM MG/KG ≤35 ASPHALTENES ≤6 SPECIFICATION (380) Density at 15℃ ≤0.97 KIN. VISCOSITY AT 50℃ ≤300 SULPER %MASS ≤3 FLASH POINT (PMCC) ℃ ≥65 POUR POINT ℃ ≥-3 WATER DISTALATION %VOL ≤1 CARBON RESIDUE %MASS ≤17 VANADIUM MG/KG ≤150 AI+SILICON MG/KG ≤30 NICKEL MG/KG ≤20 SODIUM MG/KG ≤35 ASPHALTENES ≤8 2. D2-DIESEL D2-L-02-62-GOST 305-82 2.SPECIFICATIONS 1. Cetanic index, min 45 2. Fractional composition: - 50% is distilled under the temperature °C not more 280 - 96% is distilled under the temperature °C not more 360 3. Cinematic viscosity under 20° C cct 3.0-6.0 4. Solidification °C, max -10 5. Temperature of cloudiness °C, max - 5 6. Flash point in closed crusible, °C, min 62 7. Fraction of total mass of sulphur in per cents max 0.2 8. Fraction of total mass of mercaptane sulphur per cents max 0.01 9. Content of hydrogen sulphide Is absent 10. Test on copper plate Passed 11. Content of water – soluble acid and alkali Is absent 12. Content of actual tar mg on 100 cm³, of fuel, max 25 13. Content of water Is absent 14. Acidity mg KOH on 100 cm³, of fuel, max 5 15. Iodine index g of iodine on 100 g of fuel, max 5 16. Density at 20°C, kg/m³, max. 860 3. COUNTRY OF ORIGIN: RUSSIAN FEDERATION, NIGERIA, AND GULF COUNTRIES 4.PACKING BULK Price per metric ton: U.S. DOLLARS ($), PREVAILING WORLD MARKET PRICE PER METRIC TON/BARREL including Commission for the buyer and seller intermediaries We can supply: 1.0 D2-Diesel commodity from Two (2.0) million barrels - Ten (10.0) million barrels every month Crude Oil: From Two (2.0) millions - Ten (10) million barrels every month Delivery : 30 -45 days Port of destination: to be agreed lnspection: SGS at Loading Port Payment: MT103
Posted on: Mon, 25 Nov 2013 04:41:43 +0000
Trending Topics
Recently Viewed Topics
© 2015