I have a brand new rebuilt chevy 350 4 bolt main .060 over (makes it a 360ci) built by shinook racing in Tahlequah Ok. The bottom end has 4 bolt main, all clevite bearings, scat I beam rods, speed pro flat top pistons with 4 valve reliefs, and meling m55a high pressure oil pump. It has a comp cams hydraulic flat tappet Magnum 280h, .480 valve lift. The Heads have 2.02 1.6 valves, arp screw in studs and raised guide plates, howards cams valve springs good for .570 lift, new locks and retainers, and new umbrella valve seals. The Intake is a weiand speed warrior dual plane, The Compression ratio is 9.1, runs on pump gas 87, 89 or 91 octane. It has only ran 20 minutes for cam break in. I had it in my s10 v8 swap project, but I started a different project, and sold the s10, so it has been sitting in my shop for 2 weeks taking up room. I also have the new rebuild turbo 400 transmission that was with it, in the s10, for an extra $300, it comes with a 2000-2400 stall converter. I would consider trading for a set of aftermarket small block chevy aluminum heads, Afr, brodix, dart, just let me know what you have. $1200obo pick up in stilwell ok
Posted on: Sun, 27 Jul 2014 20:31:23 +0000
Trending Topics
Recently Viewed Topics
© 2015