In my job working with Federal contracts, I saw this and thought there may be some Armor guys who would want to take this on. Hint: Youre gonna need a bigger airbush ... Cheers Jack Section C - Descriptions and Specifications PERFORMANCE WORK STATEMENTPerformance Work Statement (PWS)FORStabilization / Refurbishment of the German K5 Railroad Gun (AKA Anzio Anne)U.S. Army Ordnance Training and Heritage Center C-1 GERMAN K5 (ANZIO ANNIE)C-1.1 Scope of Work: The US Army Ordnance Training and Heritage Center is obligated to preserve the heritage of the Ordnance Corps. To meet that standard and support that responsibility the German K5 Railroad gun presently on the railroad tracks between Quartermaster Drive and Railroad Avenue needs to be stabilized and refurbished. The contractor shall furnish all labor, materials, and equipment necessary for the brush blasting, coating / painting, and debris disposal operations for the Rail Gun project, including any mobilization / demobilization of a covering structure while the work is in progress. This Rail Gun needs to be blasted to bear metal, cleaned, primed with a preservative coat and painted. All work procedures will be in compliance with all applicable Federal, State and local environmental standards to include the Chesapeake Bay Watershed Act. (See Technical Exhibit A and paragraph C-4 for more detail)C-1.2 Requirements: The contractor must be a professional company knowledgeable and specializing in restoration / conservation. The contractor shall be required to clean and coat all surfaces of the German K5 gun, its carriage and the rail car with appropriate finish to meet long term preservation requirements. All surfaces of the item include the interior, i.e. the barrel of the gun, underside of the rail car. The paint used by the contractor will be an Industrial-grade coating, e.g. DuPont Corlar Epoxy Mastic applied as recommended by the manufacturer. The entire piece, other than the markings, will be painted with two coats of Light Mouse gray per Federal Standard shade #595C [36300]. Painted in white (DuPont Paper White #1031) will be markings on the item according to attached scan and detailed notes to be provided by the Ordnance Training and Heritage Center. The completion date of the project should be no later than 180 days after award.C-1.3.2 The contractor will be working in one location: Warehouse Road.C-1.4 Personnel: The quality of all services rendered here under this contract shall conform to the highest standards in the professional field, relevant profession, trade, or field of endeavor. Contractor personnel shall have sufficient experience and skill to perform the services required by these specifications.
Posted on: Tue, 23 Sep 2014 16:26:36 +0000
Trending Topics
Recently Viewed Topics
© 2015