Kite autorelease. The auto release system has been proposed by Rico in the French forum. powerkite.net/forumSM/index.php?topic=33772.150 Here my small version: Manual release The Kamove release can be found here kiteattitudefr.votreboutiquepro.fr/largueurs/kit-larg... is one on the right servimg/image_preview.php?i=7&u=18395119 In red the platform (where the pulley screw will pass). In green where the rubber band maintaining the closed position In blue ..du the release. The assembly requires a pulley, a fastening for the pulley, a release cord with something to pull it and a fastening cord. The manual assembly should look like this: zimagez/zimage/img20130803091316.php The autorelease. Assembly servimg/image_preview.php?i=8&u=18395119 In blue the autorelease. In red the closing rubberband. In yellow a stainless steel ring 40mm diameter. This ring will be attached to the carabiner of the manual Kamove. In green the autorelease cord. Two small knots(“petit noeud”). The first one helps to stop the cord’s sliding. It should not be to close the autorelease, just underneath when the autorelease is open. The second knot is used to tie the autorelease “lengh” to the buggy. USING THE SYSTEM Manual release. Using the manual auto release is not complicated: attach the kite with the (kamove / pulley / harness) I pull the release, it is not more complicated than that. Autorelease Verify the autorelease is “armed”, i.e. that is closed and the stainless ring (YELLOW) is in place. Attach the kite with the Kamove. Get in the buggy. Grasp the stainless ring and fix it to the carabiner. The system is ready. To get off the buggy, if I want to keep my kite attached, I pull the stainless ring or the carabiner.
Posted on: Mon, 04 Nov 2013 05:32:00 +0000
Trending Topics
© 2015