Lancer TO Evolution project Unregistered, You Will need your own rights Was a normal cedia lancer, ended up getting it for small money. Paid 10K Converted the front and back a bit to evo. Parts List: -EVO 7 Bonnet -EVO 7 Front Fenders -EVO 7 Back Doors with Upholestery and Glass COMPLETE, Harness NOT CUT -Lancer Front Doors with Sound Proof Material Installed -Dashboard Brace Still There -Old Key and Column There -Dashboard, Might Have Two -EVO 7 Back Half -EVO 7 AYC Rearend Complete EXCEPT Rotor and Caliper -EVO 7 Shocks -EVO 7 GTA Front Lights -EVO 8 MR Back Lights -EVO 7 Back Bumper -EVO 7 Back Glass(The one with the rear wiper) -EVO 7 Gas tank, all items still in there, dunno if pump may be good still, it should Right, the back right side fender and back area was hit as it is in japan when i got this back half, however, the rear end bolts right up with no issues and rolls STRAIGHT, so no twist or anything on the chassis. I took it out, as they needed it off to get the spotted on and last would be putting it back up to finalise strapping it. Never got to do it due to funds. I have some upholstery parts available, as well as two front Espelir Springs. You will need two front shocks. Front Subframe is still cedia lancer as well as suspension/spindles/brakes....was going to just put back a normal lancer engine and run it so for the while because i wanted to build this car to a street car. Was gonna put an SR20 rwd or even a 4G63T convereted to RWD but then plans changed to go full 4g63t 4wd as it would be easier. Keep in mind, this is a PROJECT CAR and you can do anything you want with it. The back evo7 half was welded onto the cars original weld points, as the original cedia back half was drilled out, no cutting. However, i never got time to let them fully line up the back and put it on and while loading it on the wrecker, they kinda sent the line up off by 1/4 inch. Right side is CLOSE 1/4 too much and Left side is 1/4 Far. Minor adjusting, welding back up and bracing is what needs to be done. Recommended was using straps on left and right side of floor and using big bolts to lock it and cut the excess of bolts and weld it permenant. I have people to do these things, so if you need them, i can link them. It has no number, if you need more info on what to do and people to do it by, Call or PM for more info. These pics were taken when the car was dirty, the inside and out needs to clean. What you will need to finish is some interior parts, instrument panel, front door upholstery(Might have it), Front Windshield(Bobbys is 750 Installed), Front Bumper, Brembo Rotors and Calipers Front + Back, Rims, Engine/Box and that should be straightfoward from there. Driveshaft and Exhaust tunnel, when i got this lancer, i noticed the tunnel was the same as the evo, so if you watch under the evo7 back and lancer flooring where its joined, you will see its the same. So thats no issue there if you are worried about drivershaft. I spent ALOT of money behind this, this has been a project i wanted to finish long ago but everytime, business kept getting ahead of it. So this time, im just selling out everything i have to go towards something more important where family is concerned. Many people think it can only be finished as a race car or fast car. If you want an evo body withou the speed, you can use this, put a normal engine, and leave the body to look like the evo and enjoy gas mileage. Or for the car show men, i know alot of you will like to have an EVO7 looking car all nice outside and have a wild engine swap to be the first, to use another engine in a evo7 lol. 3SGTE or GTiR SR20DET....Never seen any evo7 with another engine like this til this date. You need a mechanic/straightener/painter? I got one and trust me, he is VERY GOOD. I am asking 25K......You are NOT going to get those parts for that price even. Even if you want to just leave it front wheel, you can just put up lancer rear frame and keep it front wheel and sell the rear end for 8-9000$....I seen them going for 8-14,000$ already so dont BS me with prices you may wanna outsmart me with. Again, Price is $25k, slightly Neg. Location Aranguez, Serious People Only.
Posted on: Thu, 24 Jul 2014 20:55:23 +0000