Less than 2 weeks left! Questions and answers for Saturday February 01, 2014. T1D05: When may amateur operators use their stations to notify other amateurs of the availability of equipment foe sale or trade? T5D05: What is the resistance in a circuit for which the applied voltage is 12 volts and the current flow is 1.5 amperes? T6D05: What type of circuit controls the amount of voltage from a power supply? T7D05: What instrument is used to measure resistance? T8D05: Which of the following emission modes may be used by a Technician Class operator between 219 and 220 MHz? Data. An ohmmeter. Regulator. 8 ohms. (R = E / I) 12 / 1.5 = 8 When the equipment is normally used in an amateur station and such activity is not conducted on a regular basis. ------------------------------------------------------------------------------- T1D06: Which of the following types of transmissions are prohibited? T5D06: What is the resistance of a circuit that draws 4 amperes from a 12 volt source? T6D6: What component is commonly used to change 120V AC house current to a lower AC voltage for other uses? T7D06: Which of the following might damage a mulimeter? T8D06: What does the abbreviation PSK mean? Phase Shift Keying. Transmissions that contain obscene or indecent words or language. Transformer. 3 ohms. (hint: R = E / I ) Attempting to measure voltage when using the resistance setting. ------------------------------------------------------------------------------ T1D07: When is an amateur station authorized to automatically retransmit the radio signals of other amateur stations? T5D07: What is the current flow in a circuit with an applied voltage of 120 volts and a resistance of 80 ohms? T6D07: Which of the following is commonly used as a visual indicator? T7D07: Which of the following measurments are commonly made using a multimeter? T8D07: What is PSK31? When signals are from an auxiliary, repeater, or space station. A low-rate data transmission mode. 1.5 amps. (hint: I = E / R) Voltage and resistance. LED. ---------------------------------------------------------------------------- T1D08: When may the control operator of an amateur station receive compensation for operating the station? T5D08: What is the current flowing through a 100-ohm resistor connected across 200 volts? T6D08: Which of the following is used together with an inductor to make a tuned circuit? T7D08: Which of the following types of solder is best for radio and electronic use? T8D08: Which of the following may be included in packet transmissions? All of theses choices are correct. Rosin-core solder. Capacitor. 2 amperes. (hint: I = E / R ) When the communication is incidental to classroom instruction at an educational institution. -------------------------------------------------------------------------- T1D09: Under which of the following circumstances are amateur stations authorized to transmit signals related to broadcasting, program production, or news gathering, assuming no other means available? T5D09: What is the current flowing through a 24-ohm resistor connected across 240 volts? T6D09: What is the name of a device that combines several semiconductors and other components into one package? T7D09: What is the characteristic appearance of a cold solder joint? T8D09: What code is used when sending CW in the amateur bands? Only where such communications directly relate to the immediate safety of human life or protection of property. International Morse. 10 amperes. (hint: I = E / R) Intergrated circuit. A grainy or dull surface. OK, if anyone should want to pursue this more. Please visit: AA9PW or hamtestonline also do a google search for an amateur radio club in your area ( county ). The members of these clubs usually have someone that will be very happy to assist you in pursuing your Amateur Radio License. Thank you for staying with me on this.
Posted on: Sat, 01 Feb 2014 05:03:54 +0000
Trending Topics
Recently Viewed Topics
© 2015