Need a Little help here guys.. 01 mustang gt, I am not the one who pulled it apart but am the one reassembling the Car. Need to know exactly where the starter wiring harness routes. Does it go behind the motor on the bellhousing or does it go across the k member at the front of the car? Obvious two wires goes to starter. Other side goes to underhood fuse block. There are 3 connectors that get connected on driver side by the fuse block, and a body ground. Theres a big black cable that looks to be a ground for engines to chassis, maybe? It has a two wire plug off the end that attaches to another plug (basically under the factory battery location). Does one side get attached to motor one to chassis as ground? Also there is a connector on the pass side 2 wire iirc its white/red. No idea where it its into. Thanks! Btw car is far from stock, and was ripped apart 3 years ago by someone else. Tubular k, built motor/trans/turbos..
Posted on: Tue, 09 Sep 2014 22:13:13 +0000
Trending Topics
Recently Viewed Topics
© 2015