Ok so I had this issue and it drove me crazy. I tried to check miniterm for the error but nothing showed. I was able to simulate an error click and it is slower then this. It will also show in miniterm as well on my tuner studio over the main gauges. Im running ms2 v3 using an edis brain ,vr and , coil. I searched and searched and finally worded it right in google. On a locust forum a guy was having the same issue. So here is the answer to get it out there. I had the edis powered by the fprelay and when it primed it would power the edis then when it shut off the edis would also shut off sending what would look like a falling edge. That would repower the fprelay causing the chain to continue. I powered the edis off the main relay and the issue is solved. Hope this helps people in the future.
Posted on: Thu, 25 Sep 2014 04:31:26 +0000
Trending Topics
Recently Viewed Topics
© 2015