RC Global Hawk Music by D2therJ This is the $59 kit from Hobby King. All up it will take around 5hrs to build at a leisurely pace. I did find that the duct exit created to much uplift which makes you think that you have a tail heavy bird when applying full throttle. I did cut a deeper channel to allow the exhaust to leave in a more direct route. I also managed to pop the foam near the wings center. This is because the wing has no brace through the center..You have 2 very nice bits of carbon fibre tube as spars but no joiner in the center. Now the wings center isnt that weak but when I was flying inverted and then decided to pull a half loop down thats when it popped. Luckily I had already installed a 2.4mm dowel in the rear of the wing and epoxied it in. Im running the 68mm EDF from Hobbyking with the 50~60Amp HK heli esc with corona DS939MG servos and my favourite 2200mah 3S turningy 20C battery. Since I popped the wing in the center it now has a 5mm balsa spar that has been epoxied in. The wing hardly flexes in a loop now. youtu.be/PbkNx0o6I8Y?list=UUjp34DMR0diLBZgtAOn4O3A
Posted on: Fri, 19 Sep 2014 21:58:14 +0000
Trending Topics
Recently Viewed Topics
© 2015