STEPS TO REPAIR AND FIX A WATER DAMAGED CELL PHONES: Tareda Abdullahi Rabiu Kurfi *.Remove the battery immediately and dont just switch-off the handset. The removing of the battery is a must. *.Now dismantle your cell phone carefully. To open your cell phone you need a torx T6 size screw driver and a tweezer. Remember the steps how you opened the phone as you will have to assemble it later! *.Dry the green coloured circuit board carefully and completely. Use a hair drier or you can also dry it in sunlight or on the top of a TV or a computer monitor. *.Dry the spare parts and components carefully. Be careful with the LCD as it is very delicate. *.Clean the circuit board with spirit using a brush. This prevents corrosion on the PCB. Now re-assemble your phone carefully and if all goes well, your cell phone should switch on without any hassles. If it fails to switch on, charge your handset and try again. If it doesnt switch on now, luck is not on your side. You will have to get your phone repaired at a service center. Note:If you are scared or not sure how to open your cell phone and follow these steps, dont go ahead to repair the phone yourself. You are more likely to damage the handset further. Just remove the battery and let a professional cell phone repair engineer do the needful ADMIN:#ABRAKU 08094477262 2GO_Abdouldtm
Posted on: Sat, 09 Nov 2013 10:29:47 +0000
Trending Topics
© 2015