The issue is that i have a cisco router on which i have a static ip 202.1.1.141 and lan ip 192.168.1.1 and i have configured ipsec on it. On the other end i have a third party router that is run on dhcp for wan and for lan its 192.168.2.1 when i connect DSL line to this router is goes on and start the ipsec tunnel , and i can have lan to lan connectivity as well. Right. Now the problem is this that i have to configure this third party router on a remote location where i have to use wireless broad band or i have to use gprs. I case of gprs its not possible because there are so many hops involved in between. In case of wireless broad band i have to connect this wireless broad band to tplink mr3220 adsl 3g/4g router to convert it into lan from usb. So it throws an ip 192.168.0.100 to third party router in this case internet is working on the third party router , ipsec connection is shown active on cisco but lan to lan connectivity is not responding. Now i have to route all the traffic from 192.168.0.0 to 192.168.2.0 ip route 0.0.0.0 0.0.0.0 202.1.1.1 name default_route ip route 192.168.2.0 255.255.255.0 202.1.1.1 name R2_net ! ip access-list extended WELO-ACL-10 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255 !
Posted on: Sun, 16 Mar 2014 17:02:58 +0000
Trending Topics
Recently Viewed Topics
© 2015