Tokyo Marui Scar-H 7.62mm Recoil AEG $950 Just priced this up through WGC and you would be looking at $1445 to purchase this new excluding the cost of the mosfet, lipo and rail covers. This is assuming an exchange rate of 1usd = 1.23nzd (which was correct as of 21/8/14) and you get hit with GST + $37 custom admin fee which is extremely likely to happen when importing. Has had a lot of the internals replaced and has been upsrung to approx 340fps. Has a decent rate of fire for a 7.4v lipo and nice range and accuracy. Includes -Scar H -6x Mags -Turnigy 1800mah 2S 7.4V Lipo (fits perfectly) -Prometheus Piston -Prometheus Piston Head -Prometheus Cylinder -Prometheus Air Nozzle -Prometheus Spring Guide -Prometheus Hop Up Rubber -Upgraded spring -Lonex A1 Motor -IRLB3034PBF Mosfet with BZW50-18 Diode -Rail Covers Dose not included pictured MOE fore grip. All original parts other than piston and hop rubber will also be supplied Internally it is in great condition, externally it needs abit of work. The stock release that you push to fold the stock has a bit snapped of so if you try and fold the stock the parts will spring out, if you do not release the stock it stays in place fine . Replacement part number is 71 The catch on the receiver that holds the stock is place is also broken, replacement part number is 100. These 2 parts can be sourced through battlesoft for $20 each The stock locking mechanism on the butt stock has snapped, recently I have just been taping it on but my long term plan was to dremel it and epoxy a washer in place. Alternatively you its part number is 48 and you can get it though Battlesoft for $25. It currently doesn’t have the mag lock functionaly as it is missing a spring, I have uploaded a picture of the spring required . The bolt release is not currently installed but it is supplied It is also missing 3 screws that and 1 pin that hold the receiver together, although it is sold without them. None of these issues effect the performance and it completely gameable as is.Should be able to fix all these issues for under $70 even if you buy the replacement butt stock Selling as i want to standardize all my gear on one size of mags.
Posted on: Thu, 21 Aug 2014 09:42:26 +0000
Trending Topics
Recently Viewed Topics
© 2015