high quality and high efficiency larger mixer Structure introduction: Machine can be divided into three parts 1, the frame portion: This is all the work of all the body mounting the rack. The racks are made of superior aircraft carbon steel, channel steel welded together, and passed the rigorous product certification and the specific process requirements, in order to achieve the purpose of the machine is used. 2, the drive coupling parts: motor driven pulley, belt, gear drive, the spindle rotation work, including work with the spindle drive gear part, even using nylon pin-type couplings, drive meshed transport pass, easy assembly and maintenance . 3, mixing working part: the driving wheel through a pin coupling, to the power transmission shaft. Welded to a special spindle synchronous rotation spiral mixing blades, the material in the mixing chamber even flip, so that the material can be fully mixed. Thereby increasing the mixing uniformity, it also uses a novel mixing rotor structure, making it the smallest gap with the housing, adjustable close to zero, thus greatly reducing the amount of residual material. Hybrid material after a period of time, from the bottom of the ad hoc body spout.
Posted on: Tue, 06 Aug 2013 01:19:33 +0000
Trending Topics
Recently Viewed Topics
© 2015