3anetwork/cisco-ws-c2960s-24ts-s-price_p14.html Why the Cisco - TopicsExpress



          

3anetwork/cisco-ws-c2960s-24ts-s-price_p14.html Why the Cisco WS-C2960S-24TS-S was Always Set Static I have a Cisco 2960 Switch WS-C2960S-24TS-S on my network that was always set static until now? I can no longer access the switch VIA the management IP address. I hooked up a console cable and connected VIA serial. Once inside the switch I ran show ip interface brief. I see that Vlan1 is set to DHCP. How can I find what IP my management is on so I can log in through http? The solution: If your switch only has VLAN 1 setup then all your ports by default belong to this vlan. I do recommend you segregating your traffic, but thats a different discussion altogether. So since you have only one vlan: Sw1>enable Sw1#config t sw1(config)#interface vlan 1 sw1(config-if)ip address# 192.168.30.232 255.255.255.0 (I am assuming this is your subnet mask) sw1(config-if)#exit sw1(config)#exit sw1# WS-C2960S-24TS-S price: Catalyst 2960S 24 GigE, 2 x SFP LAN Lite List price: US$1,895.00. Discount Price: US$625.00, best price on 3anetwork. Lets see the details of WS-C2960S-24TS-S from the below video.
Posted on: Wed, 04 Dec 2013 08:09:54 +0000

Trending Topics



Recently Viewed Topics




© 2015