Here are the services we offer at MOTOR DOCTOR CYCLES; 1. Carbureted Motorcycles a) Compression test using a motorcycle engine compression tester b) Air/Fuel mixture ratio check and adjust (lean or rich) - combustion flame color (blue or yellow) using colortune scope - exhaust gas CO analysis for air/fuel ratio using exhaust gas analyzer c) Check and adjust ignition timing using a timing light d) Check ignition pulse for mis-fires using an ignition pulse tester e) Check ignition spark voltage using ignition pulse voltage tester f) Check electrical charging system including battery voltage using a multi-tester g) Check high tension wire resistance using a multi-tester h) Vacuum test for carburetors and vacuum balancing for multi-carbs (carb synchronization) using a vacuum gauge or manometer (carb synchronizer) i) Check engine and exhaust temperature using an infrared temp tester j) Check adjust sparkplug gap using a feeler gauge k) Check and test brake fluid using a brake fluid tester l) Clean throttle body m) Decarbonize cylinder head and cylinders 2. EFI Engines (computer managed engines) a) All of the tests for carbureted motorcycles b) Computer scan using a motorcycle scanner - check for fault codes in the following - engine EFI, sensors and actuators - body electronics - transmission - brakes, ABS and traction control (if present) c) Data logging and analysis of engine operating values at idle, crusing and WOT - engine speed RPM - TPS throttle position sensor - fuel trims i.e. air fuel mixture - lean or rich - misfires - fuel injection values i.e. volume and injection pulse width - injection timing - ignition advance - engine coolant temperature d) Actuation tests - power balance test for injectors - power balance for ignition/sparkplugs - fuel pump - transmission electronics - body electronics - ABS components - other control modules
Posted on: Mon, 18 Nov 2013 01:44:18 +0000
Trending Topics
Recently Viewed Topics
© 2015