!!!!!!!!!CONTINUED FOGGER REWICKING TUTORIAL!!!!!!!!!!! Pic1: slide and glide your cotton thru the hollow metal sleave and screw it down but not tight and then clip your cotton right at top of metal sleave that says fogger Pic2: gently push cotton down the side of each coil right on top of each juice channel if you cut your cotton correctly you will have enough cotton to cover each juice channel, then you want to make sure your cotton is pushed away from airhole under both coils or else you will have a leaky mess on hand, if your cotton isnt properly covering juice channels you will have a leaky mess, from here screw on the top cone and rest of fogger parts and it is g2g Conclusion: this takes practice just like anything else dont give up and im always there at the shop to give you pointers or help if you get too frusterated....side note there are different ways of wicking these foggers but the end result is the same cotton over juice channel but away from airhole if you shove cotton into channel too deep or run it down the channel your cotton will act as a cork rather than a wick so trust me guys just do the way im showing you and you will have absolutly no problems 99.9% of the time HAPPY VAPING PUTOS!!!!!!!
Posted on: Tue, 18 Nov 2014 05:45:40 +0000
Trending Topics
Recently Viewed Topics
© 2015