PLEASE SHARE THESE BIG JOB OPPORTUNITIES!!!!!!!! INDIA AND PHILIPPINE HIRING WORKSHOP IN SEPTEMBER 2014. Al Hoty Co., Ltd., one of the most sought-after companies by job applicants in the oil/gas service sector in Saudi Arabia, is in urgent need of the following personnel. Short-listed candidates will undergo face-to-face interview in Mumbai or Chennai (India) and in Makati, Philippines, scheduled in September 2014. Successful candidates will receive highly competitive/attractive job offers on the spot. Chemicals Department: Job Title Vacancy Years Experience Reqd. Job Description Civil Engineer / Construction Engineer 8 10+ Required PMT Experienced Construction Engineer. Responsible for the day-to-day construction activities of contractors on-site, scheduling manpower and expediting receipt of equipment and materials. Review shop drawings, negotiate change orders, resolve contractor conflicts, and provide site coordination on items pertinent to meeting specific cost and time requirements with the contract documents. Requires significant field-construction exposure that may be gained through practical construction experience and/or a degree in engineering with good field/design experience. Construction Engineer (AROMATICS) 1 10+ Duties and Responsibilities: 1. Has adequate experience to independently handle EPC Construction projects. 2. Perform, check/review/ensure technical accuracy and quality of all discipline deliverables such as structural analyses, design calculations, drawings, specifications, purchase requisitions, technical bid evaluations etc. for the construction and installation engineering. 3. Shall be responsible for planning, organizing and delegation of work to discipline engineers. 4. Directly reporting to Construction Superintendent for all matters for allotted project related issues. 5. Ensures adherence to company procedures, specifications and guidelines. 7. Review and approval of all vendor documents, drawings. 8. Taking dimensions from equipment and producing drawings for fabrication, layouts and sketches. 9. Ensuring the timely review of all engineering deliverables. 11. Works within the estimated budget and ensuring high efficiency. 12. Shall be responsible for technical meetings with Contractors, Clients, PMT, Operations, Yard etc. and maintaining cordial relationship with all involved parties. Minimum Requirements: 1. Civil Engg [BS/MS/BE] min 10 years experience in Civil Engineering & Structural Design in Oil & Gas industries. Possessing experience and a good understanding of working on EPC projects. Conversant with relevant International codes and standards, fluent in spoken and written English, involved in engineering services with EPC companies or Engineering consulting International groups in the Oil and Gas business. Demonstrate experience in carrying out engineering design and understanding the EPC process. 2. Able to drive and supervise the Construction process in the company and the commissioning process. Also possess strong understanding of EPC contractual agreements. Good command using general computer software’s such as MS Office, Mathcad, AutoCAD2012 or higher, STAAD Pro or similar. Construction Engineer (NAPHTA) 1 10+ Duties and Responsibilities: 1. Has adequate experience to independently handle EPC Construction projects. 2. Perform, check, review, ensure technical accuracy and quality of all discipline deliverables such as structural analyses, design calculations, drawings, specifications, purchase requisitions, technical bid evaluations etc. for the construction and installation engineering. 3. Shall be responsible for planning, organizing and delegation of work to discipline engineers. 4. Directly reporting to Construction Superintendent for all matters for allotted project related issues. 5. Review and approval of all vendor documents, drawings. 6. Taking dimensions from equipment and producing drawings for fabrication, layouts and sketches. 7. Assist in revision of drawings and layouts. Responsible for providing guidance and motivation to other team members. 8. Ensuring the timely review of all engineering deliverables. 9. Works within the estimated budget and ensuring high efficiency. 10. Shall be responsible for technical meetings with Contractors, Clients, PMT, Operations, Yard etc. and maintaining cordial relationship with all involved parties. Minimum Requirements: 1. Civil Engr [BS or MS or BE] minimum 10 years experience in Civil Engineering & Structural Design in Oil & Gas industries. Possessing experience and a good understanding of working on EPC projects. Conversant with relevant International codes and standards, fluent in spoken and written English, involved in engineering services with EPC companies or Engineering consulting International groups in the Oil and Gas business. Demonstrate experience in carrying out engineering design and understanding the EPC process. 2. Able to drive and supervise the Construction process in the company and the commissioning process. Also possess strong understanding of EPC contractual agreements. Good command using general computer software’s such as M Office, Mathcad, AutoCAD2012 or higher, STAAD Pro or similar. Construction Supt. Mechanical 3 10+ BS Mech Engg, with minimum 10 years construction experience, working knowledge in engineering design, industrial standards and codes, construction methods and practices. Const Mat Spec II / Materials Tech I 2 10+ 10 years combined experience in one or more of the following fields; construction, project design, project planning and scheduling, procurement, site materials control, or materials scheduling and forecasting. Working knowledge of the ARAMCO Materials System including allocation and issuing procedures, teleprocessing equipment usage and materials accountability. Ability to set-up a materials accountability system for a small to medium scale project. Cost Engineer 2 7+ Required PMT experienced as Cost Engineer. Prior to finalization, reviews the monthly draft updates provided by the various project teams for the Monthly Project Update, Budget Item (BI) Summary Report, Project Planning Update, Proposal Budget Item Summary Report in SAP. Checks the Cost Rackups for each JOs under each BIs of each Division as necessary. Checks all BIs/JOs Expenditure Forecast / Cash flows for the project. Supports the preparation of the MIS Report. Updates the NDE (Net Direct Expenditures) including labor, material, invoices, manpower, including capital expenditures, GES man-hours expended. Reviews and verifies the correctness of the Monthly Contractor’s Construction Progress Report as basis for their invoices. Ensures the validity of invoice cost breakdown (Design, Materials and Labor) to be entered in creating the Release Purchase Orders (POs) and Service Entry Sheets of each invoice in SAP. Supports the individual project teams for all Contractor invoices (GES, Construction and Miscellaneous) for payments charged to the projects or NDE. Reviews the final preparation of the SMP Man-hours Allocation Report charged to projects. Reviews and finalized the PMT Redistributed Labor charged to projects. Reviews and verifies the correctness of employee’s Expense Reports and Payment Authorization forms being prepared. Prepares the summary Invoice Accruals of the Project. Ensures that the Journal Entry – Correction of Accounting Charges in WBS are prepared in order to transfer incorrect charges to the appropriate charge account numbers as required. Ensures the accuracy of the Transfer of Material/Charges forms in order to transfer material charges to the appropriate charge account numbers as required. Assists employees in the department on all cost related matters. Prepares other reports / inputs needed by the Department as required. Electrical Engineer 4 10+ Required PMT experienced Electrical Engineer. Review electrical drawings (one-line diagram, hazardous classification, power layouts, etc.). Review major electrical equipment layout. Review basic engineering studies and calculations (short circuit, load flow, motor starting, cables sizing, etc.). Endorse of direct sourcing electrical equipment Review PIB building and Electrical substation layout. Review vendor’s drawings/documents of major electrical equipment (such as switchgears, Transformers, etc.). Coordinate electrical interfaces with Utilities and other packages/projects as applicable. Coordinate with process and mechanical discipline to identify critical loads/equipment for emergency power supply sizing. Assure overall electrical design as per project specification. Includes responsibility for providing technical service to company Electrical units and handling facilities, coordination of engineering work to solve major problems on quality and design in Electrical Circuits, initiation of capital budget items and preparation of expenditure request justification with financial analysis. This includes maintaining up-to-date comprehension of all Electrical Design problems and operating difficulties in area of responsibility, familiarity with demand pattern for quality and quantity of outcome Electrical Capacity, thorough understanding of capabilities and limitations of all facilities in area of responsibility. Review: electrical drawings (one-line diagram, hazardous classification, power layouts, etc.), major electrical equipment layout, basic engineering studies and calculations (short circuit, load flow, motor starting, cables sizing, etc.), endorse of direct sourcing electrical equipment. Review PIB building and Electrical substation layout, vendor’s drawings/documents of major electrical equipment (such as switchgears, Transformers, etc.) Coordinate: electrical interfaces with Utilities and other packages/projects as applicable, with process and mechanical discipline to identify critical loads/equipment for emergency power supply sizing. Assure overall electrical design as per project specification. Engineering Assistant 1 6+ 1. Determines engineering requirements by conducting inspections and analytical tests; analyzing and synthesizing data; maintaining control charts; determining root causes; preparing bid specifications. 2. Resolves engineering problems by collecting and analyzing information; researching, analyzing, adapting, and modifying engineering techniques; recommending solutions; preparing drawings, schematics, and diagrams; evaluating components, materials, and suppliers; resolving design integration issues; developing specifications and safety standards; performing installations. 3. Verifies engineering applications by conducting tests and inspections; building and analyzing models and simulations; conducting laboratory experiments and measurements. 4. Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; escalating project completion impediments. 5. Meets cost standards by preparing cost-benefit analyses; tracking and reporting expenses. Field Services Support Coordinator 1 8+ 1. Coordinates, monitors and improves fields service activities. 2. Provides supports and guidance to service personnel who perform on-site routine services including installation, maintenance, and repair. 3. Ensures fields services are effective and customers’ requirements are met. Familiar with standard concepts, practices, and procedures within a particular field. 4. Relies on experience and judgment to plan and accomplish goals. Performs a variety of tasks. May lead or direct the work of others. A certain degree of creativity and latitude is required. HSE Engineer 2 10+ BS Degree. Preferably with experience in Oil/gas industry. Duties: Required PMT experienced HSE Engineer. To control and to support HSE issue about inside of this project organization and coordination with outside to meet HSE management Policy. To confirm that CONTRACTOR and all CONTRACTOR employees, agents and Subcontractor comply with all HSE regulation and laws governing the work site and General Instruction (GI’s) and other related rule and regulations at all times and in any event. Ensures compliance with safety regulations specific to Process Plant Operations and safe Operational practices and procedures. Demonstrates his knowledge and experience of the International & national practices, regulations and standard for Industrial Safety, health, environment and Fire & Gas Protection. Verifies that HSE personnel assigned to the project are suitably qualified by education, training and experience in the type of work involved in this project (as defined by the Company), and experienced in contractor’s HSE management systems. Organize and manages construction HSE audits on site. Verify, during the construction activity, that all Subcontractors comply with and adhere to the contractor’s HSE Project documentation and Company requirements. Develops or coordinates development of project procedures. Serve as the Division expert within the field of HSE when called upon to address regulatory agency compliance issues, third party safety & liability consultants and subcontractor representatives. Provide regular written reports, as well as other production-related results and updates to the HSE Manager. Assist project team in investigation of all project incidents and ensure proper records are completed and submitted. Assist in implementation of corrective actions as it relates to the incident and ensure “lessons learned” are communicated throughout the Company and are incorporated into the program, if necessary Devise, supervise, and coordinate training programs or media which will increase proficiency in safe practices and promote HSE consciousness. Interface Coordinator 4 10+ Job Description: Responsible for coordinating all engineering, procurement, construction and installation work-related interface issues and activities between departments, contractors and companies engaged in the execution of the project. Liaising on all interface matters, provide Interface Plan, correspondence and reports. Qualifications: BS Degree is preferable. Preferably with petro-chem or oil/gas experience. Experience in customer and client services with proven track record of developing good relationships. Excellent verbal and written English communication. Ability to plan events and to coordinate related logistics with a high level of organization and attention to detail Technically adept, computer savvy. Logistic Services support coordinator 1 7+ BS Degree. Duties: Required PMT experienced Logistic Coordinator; able to communicate effectively since the job primarily involves liaising with clients, couriers and other operational departments; . Must be able to organize personnel, and assist with training as required, whilst also organizing budgets and courier expenses. A Logistics Coordinator must ensure that quality assurance checks are completed and maintained, also be required to assist clients with product selection and pricing to improve transportation routes. A Logistics Coordinator is especially responsible for monitoring deliveries, ensuring customer satisfaction and maintaining accurate logs of all transportation and goods. Mechanical Engineer 8 10+ Required PMT experienced Mechanical Engineer. Managing Mechanical construction activities carried out by EPC / contractors, ensuring the scope of work is achieved in accordance with contract requirements and timeframe, and in compliance with specifications and standards established. Coordinating the activities of specialty supervisors ensuring that priority disputes are resolved. Cooperating closely with the Safety team to ensure that HSE standards are maintained and that safety issues are monitored and addressed by the site supervision team. Ensuring that contractors duties are performed by competent and experienced personnel and in sufficient numbers to achieve objectives, promptly advising the Construction Area Manager of any areas of concern. Ensuring that the quality of work carried out complies with HSE standards. Monitoring and reporting, in conjunction with specialty supervisors, technical progress. Monitoring and reporting, in conjunction with Project Control personnel, the progress of contractors. Reviewing and commenting on documentation produced by contractors (technical reports, specifications, procedures, drawings, (etc.) ensuring implementation of established procedures and good engineering practice. Reviewing and evaluating any change proposals / requests, ensuring appropriate technical support is provided in decision making. Expediting with material control function material delivery, distribution and availability in accordance with planned activities, ensuring Contracts & Procurement are notified to purchase lost or missing material. Providing within the Construction Site Team, for studies and activities, a point of direct contact and liaison with various design institutes, interested parties, and approvals and regulatory authorities. Mechanical Engr - Piping 10 10+ Required PMT experienced Piping Engineer. Managing construction activities carried out by contractors, ensuring the scope of work is achieved in accordance with contract requirements and timeframe, and in compliance with specifications and standards established. Coordinating the activities of specialty supervisors ensuring that priority disputes are resolved. Cooperating closely with the Safety team to ensure that HSE standards are maintained and that safety issues are monitored and addressed by the site supervision team. Ensuring that contractors duties are performed by competent and experienced personnel and in sufficient numbers to achieve objectives, promptly advising the Construction Area Manager of any areas of concern. Ensuring that the quality of work carried out complies with HSE standards. Monitoring and reporting, in conjunction with specialty supervisors, technical progress. Monitoring and reporting, in conjunction with Project Control personnel, the progress of contractors. Reviewing and commenting on documentation produced by contractors (technical reports, specifications, procedures, drawings, etc.) ensuring implementation of established procedures and good engineering practice. Reviewing and evaluating any change proposals / requests, ensuring appropriate technical support is provided in decision making. Expediting with material control function material delivery, distribution and availability in accordance with planned activities, ensuring Contracts & Procurement are notified to purchase lost or missing material. Providing within the Construction Site Team, for studies and activities, a point of direct contact and liaison with various design institutes, interested parties, and approvals and regulatory authorities. Mechanical Engr - Rotating 5 10+ BS Mech Engr. Preferably with petro-chem/oil/gas exp. The Rotating Equipment Engineer provides support and expertise in the area of rotating equipment for onshore and offshore oil/refining and petrochemical projects throughout all of the engineering phases of the project, including conceptual design, front-end engineering, detailed design, construction, pre-commissioning, commissioning and start up. Mechanical Engr - Stat 2 10+ BS Mech Engr. Preferably with petro-chem/oil/gas exp. PCS Engineer 2 10+ BS Engineering. Preferably with petro-chem/oil/gas exp. Required PMT experienced PCS Engineer. Review P&ID and instrument data sheet. Review projects P&IDs, coordinate all OOK activities between OOK MAC representative and EPC Contractor. Review DCS and CP-3/4 console layout and arrangement. Review instruments and control scope in the mechanical packages. Coordinate instruments and control interfaces with Utilities and other packages/projects as applicable. Assure overall instruments and control design as per project specification. Coordinate with EPC contractor and vendors to identify and plan for FAT & SAT activities of major control systems (such as DCS, ESD, etc.). Review PIB’s layout and scope of supply. Review relief valves and control valves final selection for critical services. Coordinate PMT SIL effort. Endorsing of direct sourcing control systems items Instrument Engineer 5 10+ BS Engineering. Preferably with petro-chem/oil/gas exp. Required PMT experienced Instrument Engineer. Review DCS and CP-3/4 Console layout and arrangement located in the central control room, Review instruments and control scope in the mechanical packages as applicable. Coordinate instruments and control interfaces with Utilities and other packages/projects as applicable. Assure overall instruments and control design as per project specification. Coordinate with EPC contractor and vendors to identify and plan for FAT & SAT activities of major control systems (such as DCS, ESD, etc.), Review PIB’s layout and scope of supply Review relief valves and control valves final selection for critical services Coordinate PMT SIL effort, Endorsing of direct sourcing control system items. Scheduling Engineer 2 10+ BS Engineering. Preferably with petro-chem/oil/gas exp. Required PMT experienced as Scheduling Engineer. DUTIES: To support the project team on developing the project plan, manage the interfaces between the packages, help the contractor developing the required planning and reporting deliverables, evaluate the contractor schedule and controls the progress reports. Create and present the project planning report to the project manager. • Provide planning and scheduling support required in the execution of project plan. • Work with the contractor’s to develop the realistic project planning deliverables (schedule, quantity tracking, earned value, periodic reporting). • Review, evaluate & comment on the all contractor deliverables, present the area of risk to the project team. • Prepare and present the planning periodic reports to the project team. • Develop Project WBS using the latest project planning and scheduling tools, e.g. Primavera P6. • Plan and provide work direction as required in the preparation of planning and scheduling control systems and practices to provide Engineering, Procurement and Construction supervisors the means to evaluate the progress and execution of assigned projects. • Provide staffing guidance to Engineering and Construction supervisors in the areas of planning and scheduling by analyzing and evaluating all contractor’s planning and reporting deliverables. • Analyze major capital projects to plan the effective execution sequence based on current industry practices. • Discuss, coordinate and resolve long term and short term planning and scheduling problems with personnel throughout the company and with contractor organizations. Planner / Scheduler 3 10+ BS Engineering. Preferably with petro-chem/oil/gas exp. Required PMT experienced Scheduling Engineer. To support the project team on developing the project plan, manage the interfaces between the packages, help the contractor developing the required planning and reporting deliverables, evaluate the contractor schedule and controls the progress reports. Create and present the project planning report to the project manager. • Provide planning and scheduling support required in the execution of project plan. • Work with the contractor’s to develop the realistic project planning deliverables (schedule, quantity tracking, earned value, periodic reporting). • Review, evaluate & comment on the all contractor deliverables, present the area of risk to the project team. • Prepare and present the planning periodic reports to the project team. • Develop Project WBSs using the latest project planning and scheduling tools, e.g. Primavera P6. • Plan and provide work direction as required in the preparation of planning and scheduling control systems and practices to provide Engineering, Procurement and Construction supervisors the means to evaluate the progress and execution of assigned projects. • Provide staffing guidance to Engineering and Construction supervisors in the areas of planning and scheduling by analyzing and evaluating all contractor’s planning and reporting deliverables. • Analyze major capital projects to plan the effective execution sequence based on current industry practices. • Discuss, coordinate and resolve long term and short term planning and scheduling problems with personnel throughout the company and with contractor organizations. Process Engineer (AROMATICS) 1 10+ Purpose and Scope: Carry out assigned duties related to the preparation, checking and issue of Process Engineering deliverables. This includes site visits and coordination with Contractor’s Project Team. The potential candidate should have deep discipline knowledge to that of coordinating with various engineering disciplines involved in the project. Duties and Responsibilities: 1. Reports to Technical Manager and works under his overall supervision 2. Reviews documentation and raises queries where there is lack of clarity, interfaces with other disciplines to ensure integration of activities and provide Process inputs. Possess ability to develop Process Design Basis based on scope of work, perform Process simulation and establish Heat & Mass Balance as required, perform Equipment/Instrument sizing calculations; prepare and conduct the critique review of Process Flow Diagrams, P&IDs, Process data sheets, and other Process deliverables and provides recommendations for improvement. Possess adequate knowledge to plan HAZOP, HAZID and other safety studies, provide process input and participate as required. Reviews and provides recommendations to ensure Process related aspects are covered in the Operating Manuals and provide support during commissioning and performance run. 3. Provides input for the development of the Planning aspects of Process Systems to monitor and control man-hours to ensure that the job is finished within budgeted Man-Hrs. & project’s progress reporting. 4. Reviews drawings and document register to ensure all deliverables are accounted for the project in accordance with the Contract. Receives “as built” information from the Contractors, reviews content and provide review comments to enhance the contents are in accordance with the field executed events for traceability. Minimum Requirement 1. BS Chemical Engineering; min 10 years experience in the oil and gas plants Design and Engineering. Knowledge and expertise in using process-engineering software like HYSIS, PIPESIM, and PIPEPHASE essential. 2. Proven skills in routine process calculations and use of process software and in-house developed spreadsheets. Good knowledge of relevant engineering codes and standards. Good command of written and spoken English and report writing. Process Engineer (NAPHTA) 1 10+ Purpose and Scope: Carry out assigned duties related to the preparation, checking and issue of Process Engineering deliverables. This responsibility includes site visits as required and close coordination with other engineering disciplines and coordination with Contractor’s Project Team. Have deep discipline knowledge coordinating with various engineering disciplines involved in the project. Duties and Responsibilities: 1. Reports to Technical Manager and works under his overall supervision 2. Reviews documentation and raises queries where there is lack of clarity, interfaces with other disciplines to ensure integration of activities and provide Process inputs. Possess ability to develop Process Design Basis based on scope of work, perform Process simulation and establish Heat & Mass Balance as required, perform Equipment/Instrument sizing calculations; prepare and conduct the critique review of Process Flow Diagrams, P&IDs, Process data sheets, and other Process deliverables and provides recommendations for improvement. Possess adequate knowledge to plan HAZOP, HAZID and other safety studies, provide process input and participate as required. Reviews and provides recommendations to ensure Process related aspects are covered in the Operating Manuals and provide support during commissioning and performance run. 3. Provides input for the development of the Planning aspects of Process Systems to monitor and control man-hours to ensure that the job is finished within budgeted Man-Hrs. & project’s progress reporting. 4. Reviews drawings and document register to ensure all deliverables are accounted for the project in accordance with the Contract. Receives “as built” information from the Contractors, reviews content and provide review comments to enhance the contents are in accordance with the field executed events for traceability. Minimum Requirement: 1. Bachelor’s degree in Chemical Engineering from a reputed institute; 10 years’ experience in the oil and gas plants Design and Engineering. Knowledge and expertise in using process-engineering software like HYSIS, PIPESIM, and PIPEPHASE essential. 2. Proven skills in routine process calculations and use of process software and in-house developed spreadsheets. Good knowledge of relevant engineering codes and standards. Good command of written and spoken English and report writing. Good interpersonal relationship. Process Engineer I 4 10+ Required PMT experienced Process Engineer. Performs engineering studies, design, development and control of assigned projects within any of the recognized fields of engineering. Review and validate all process documents such as P&IDs, PFDs, ESDs, etc. Develop process engineering studies as required to optimize plant design and cost. P&ID,PFDs.ESDs UFD,M&HB & Process Data Sheets owner. Follow all the studies developed during engineering, procurement and construction phase. Ensure safe working practices are carried out within the project team. Review and track all Process Deliverables. Track and verify actual progress for Process Deliverables and invoice verification purposes. Assist the Sr. Project Engineer in reviewing the change order and the potential impacts on the project. Maintain constructive relationship with Partners and Contractors. Ensure that the EPCC work is conducted and related deliverables are developed and delivered in full compliance with contract requirements to meet Company’s HSE & Quality standards. Assist the lead Process Engineer in tracking the Package deliverables against their milestones for delivering the Package within schedule and budget. Escalate any project issues or risks to the Project Manager. Propose recovery plans for off-schedule and/or mitigation plan for risks that could impact project schedule. Review project deliverables with team members. Help to coordinate or Coordinate the preparation of reporting on technical matters. Act as Company interface with Licensor Process Engineer I - TST 2 15+ Required PMT experienced Project Engineer with Process background. • Min 15 yrs. experience including 5 yrs. in Refining/Petrochemical • Preferred experience in Project Management / new plants commissioning • English Speaking/ Writing. Performs engineering studies, design, development and control of assigned projects within any of the recognized fields of engineering. Review and validate all process documents such as P&IDs, PFDs, ESDs, etc. Develop process engineering studies as required to optimize plant design and cost. P&ID,PFDs.ESDs UFD,M&HB & Process Data Sheets owner. Follow all the studies developed during engineering, procurement and construction phase. Ensure safe working practices are carried out within the project team. Review and track all Process Deliverables. Track and verify actual progress for Process Deliverables and invoice verification purposes. Assist the Sr. Project Engineer in reviewing the change order and the potential impacts on the project. Maintain constructive relationship with Partners and Contractors. Ensure that the EPCC work is conducted and related deliverables are developed and delivered in full compliance with contract requirements to meet Company’s HSE & Quality standards. Assist the lead Process Engineer in tracking the Package deliverables against their milestones for delivering the Package within schedule and budget. Escalate any project issues or risks to the Project Manager. Propose recovery plans for off-schedule and/or mitigation plan for risks that could impact project schedule. Review project deliverables with team members. Help to coordinate or Coordinate the preparation of reporting on technical matters. Act as Company interface with Licensor Project Engineer 2 10+ Required PMT experienced project Engineer - Civil, A. Performs all supervisory duties common to the Unit level as established by Management. B. Supervises and coordinates preparation of the project proposal including development and analysis of alternates. C. Presents or participates in presenting the project proposal to proponents and other interested organizations at technical meetings in SAO and following resolution of problems secures project proposal approvals. D. Supervises, coordinates and directs preparation of budget briefs, budget estimates, expenditure requests, economic analysis and authorizations for expenditures. E. Coordinates the preparation of contracts, technical information and other information required for the award of design, project management and construction contracts. F. Supervises and coordinates overall planning, control and appraisal of the project as defined by the approved scope. G. Ensure that designs meet Saudi Aramco standards and specifications and that alternate designs or changes are economical, operable and meet safety, maintenance and schedule requirements. H. Responsible for compliance to project controls and administration guidelines/procedures including those related to cost control and forecasting, planning and scheduling, contract administration and materials control, during project execution. I. Responsible for maintaining project records including drawings, specifications, logs, financial reports and project correspondence. J. Approves contract payment and variations within limits of his authority; endorses and forwards to higher authority. K. Supervises and coordinates planning to adjust to unanticipated changes in scope, materials and equipment delivery and cost. L. Provides administrative guidance to his assigned engineers, drafts job appraisals, recommends merit increases and promotions and handles routine personnel functions. M. Will relieve the project manager or act in lieu of project manager, as required. N. Activates and controls a system which will ensure project start-up and appropriate spare parts requirements. Project Engineer - Civil 2 12+ Required PMT experienced project Engineer - Civil, A. Performs all supervisory duties common to the Unit level as established by Management. B. Supervises and coordinates preparation of the project proposal including development and analysis of alternates. C. Presents or participates in presenting the project proposal to proponents and other interested organizations at technical meetings in SAO and following resolution of problems secures project proposal approvals. D. Supervises, coordinates and directs preparation of budget briefs, budget estimates, expenditure requests, economic analysis and authorizations for expenditures. E. Coordinates the preparation of contracts, technical information and other information required for the award of design, project management and construction contracts. F. Supervises and coordinates overall planning, control and appraisal of the project as defined by the approved scope. G. Ensure that designs meet Saudi Aramco standards and specifications and that alternate designs or changes are economical, operable and meet safety, maintenance and schedule requirements. H. Responsible for compliance to project controls and administration guidelines/procedures including those related to cost control and forecasting, planning and scheduling, contract administration and materials control, during project execution. I. Responsible for maintaining project records including drawings, specifications, logs, financial reports and project correspondence. J. Approves contract payment and variations within limits of his authority; endorses and forwards to higher authority. K. Supervises and coordinates planning to adjust to unanticipated changes in scope, materials and equipment delivery and cost. L. Provides administrative guidance to his assigned engineers, drafts job appraisals, recommends merit increases and promotions and handles routine personnel functions. M. Will relieve the project manager or act in lieu of project manager, as required. N. Activates and controls a system which will ensure project start-up and appropriate spare parts requirements. Quality Systems Specialist 1 10+ Sr. Inspector - Electrical 1 10+ BS Electrical plus ten (10) years of either electrical, instrumentation or telecommunications experience in the construction/ petrochemical industry. OR Two (2) years industrial/technical College Diploma plus fifteen (15) years of either electrical, instrumentation or telecommunications experience in the construction/petrochemical industry. Confirmed full working knowledge of quality system standards and methods (ISO 9001). Quality Management work experience in construction of either industrial electrical power distribution and control systems, or industrial OSP/ISP telecommunication systems (petrochemical or hydrocarbon experience is preferred). Confirmed working knowledge of applicable industry standards for either electrical power and control systems (i.e., NFPA 70 NEC, ANSI/EEE C2 NESC, NEMA, UL, NACE, API and PIP/CII), or telecommunications systems (i.e., GTE, BICSI TDMM, NFPA 70 NEC, EIA/TIA, IEC, UL, and ANSI/IEEE C2 NESC). Welding Engineer 2 10+ Welding Engineer with related welding experience, including metallurgical engineering, in a construction, fabrication, or repair facility with a B.Sc. in materials/metallurgical engineering or similar technology diploma with more experience. - Develop and qualify welding procedure specifications (WPS) and related procedure qualification records (PQR), supervise and document welder qualifications, interact with welding department (manufacturing and repair), work with welders, suppliers, 3rd party NDE personnel, to meet the users requirements. - Review project specifications for welding process, base metals, filler metals, heat treatment, and NDE requirements; select appropriate welding procedure specifications (WPS), and if required, qualify new WPS. - Submit material and process selection recommendations to ensure attainment for design objectives and service application. - Review order packages and advise the Project Manager of potential materials, welding, heat treatment, or NDE problems. - Develop and qualify new WPS/PQR when required. - Develop welding procedure data sheets when new WPSs are qualified. - Review project specifications for cost exceptions. - Submit the selected WPS(s) and supporting procedure qualification records PQR(s), welder qualification records, and any additional information (e.g., weld maps, additional NDE or inspection, cost exceptions, etc.) to the Project Manager for approval. - Periodic reviews of the company’s welding practices, as related to codes, standards (e.g., Project Standard), and local regulations. Drilling & Workover Department Job Title Vacancy Qualifications Job Description Civil Engineers 2 BS – Civil or Geodetic Experience: Minimum 4 years in earth work, road construction. • Thorough knowledge in heavy earth works, roads construction, landscaping or similar. Familiar with soil compaction stabilization techniques and modern test methods are a requirement for Well sites location preparation. Physically fit, healthy, able to handle field work. • Should have the capability and willingness for extensive long distance and desert driving since this is a Field Engineer position whose work locations are scattered all over the Kingdom of Saudi Arabia. Survey Party Chief 19 BS – Civil or Geodetic or Surveying Experience: Minimum 4 years in earth work or road construction. • Familiar with soil compaction stabilization techniques and modern test methods are a requirement for Well sites location preparation. Physically fit, healthy, able to handle field work. Should have the capability and willingness for extensive long distance and desert driving since this is a purely field position whose work locations deep desert and are scattered all over the Kingdom of Saudi Arabia. • Good knowledge in AutoCAD and/or Micro Station PC operation. Computation of field survey data, including geometric and volumetric calculations, using programmable calculator and PC. General survey computations including geometric, traverse and level circuit adjustment and grid projection coordinate calculations. Should possess thorough knowledge of computer assisted map production systems, proficient in all phases of digital map production. Full working knowledge of Navigation systems, symbols and abbreviations; navigational light characteristics. Geographic Information Systems (GIS) and topologic structuring of datasets for GIS migration. These surveyors conduct field survey for D&WO Well sites locations and conduct land survey for volumetric calculations. Heavy Equipment Technician 11 BS in Mechanical Engineer or Equivalent diploma Experience not less than Six (6) years of experience in the maintenance and repair of equipment and engines. Performs skilled repair, inspection, preventive maintenance and trouble shooting on heavy and light equipment. This includes the repair/maintenance of generators and other mechanical / electrical equipment in shop and field RTR DEPARTMENT: Position Description RT Refinery is seeking experienced engineers with projects planning, coordination and execution experience to work under RT Refinery projects unit. The candidate will work with a team of engineers, planners, field coordinators who are planning, coordinating, and executing small projects (BI-19 , $4 Million or less) and planning, coordinating, and supporting execution of major project (More than $4 million). Thus the candidate is expected to: 1) Use his plant/process engineering experience to build business case for small and large projects in RTR. 2) Use his plant/process engineering experience to troubleshoot plants problem and give recommendations. 3) Plan and coordinate Major and BI-19 projects in RTR. 4) Coordinate the design packages, material procurement, and field execution of BI-19 projects in RT Refinery. 5) Coordinate the closure of all RTR small projects and participate in the closure of Major projects 6) Responsible of coordinating and reviewing all design packages required for RTR projects/modification. 7) Share parts of RTR safety, reliability, optimization, and innovation programs responsibilities. Selection Criteria 1. BS Mechanical or Plant mechanical Engineering. 2. Should have practical experience in project planning, execution, commissioning, (Mechanical/Electrical/ Instrumentation/Digital). 3. Multi-discipline experience is an added qualification. 3. 10 year experience in plants mechanical engineering in Oil/ Gas industry (Minimum of 5 years in Refining). 4. Depth of knowledge of Mechanical engineering in design, design package reviews, Stationary/rotating/piping sizing and maintaining, and troubleshooting. 5. Thorough knowledge of engineering standards, practices, and project planning and execution. Also, Knowledge of materials procurements, projects execution planning, and work planning systems (SAP). 6. Certification on Project management is strongly preferred. 7. Very good English language skills and competent in the use of PC applications (MS Office suite or equivalent). Maintenance (Projects) Planner I (up to GC-12) Two (2) years Diploma in Mechanical Engineering plus 12-15 years field planning experience with minimum of five (5) years of experience in Refinery Maintenance/Projects Planning. • Participate in design package reviews • Review the MTO and confirm all the materials are listed as per scope • Assist the Construction engineer with contract development, estimation, technical evaluation and administration • Procure material through SAP (Follow up and expedite with Material Control Unit/Buyer/Vendor) • Coordinate and arrange logistics • Develop execution plan in MS project or primavera • Prepare material and project reports • Basic knowledge in standards, P&IDs, data sheets and engineering drawings • Prepare project estimates, review estimates and control cost during execution Engineer I (B.S. in Engineering (Chemical, Mechanical , Electrical) Duties and Responsibilities A. Plans, schedules and provides work direction as required for preparation of designs, processes, reports, correspondence and related data and assures the efficiency, adequacy and conformance to overall objectives of all phases of very complex engineering problems. B. Support the development and formulates the basis for engineering studies in any of several basic or special engineering fields by analyzing and evaluating all data pertinent to problems. Evaluates data as to scope, effect on existing installations, economic value, long range planning and budgetary considerations. C. Leads the activists of project proposal that include development of scope, functions, interrelationship, integration, physical solution definition, cost estimate, etc. Leads project execution for project proposal, initiatives, studies and continuous improvement of solutions and Problem solvers. D. Initiates detailed work outline and makes decision as to basic approaches, processes and/or equipment. Performs work and/or delegates work to other engineers for final development of specialized or technical proposals and proposed projects. E. Brings all elements of a project together, makes certain that all elements proceed satisfactorily on schedule and within the money allowed and initiates corrective action as required. Reviews cost estimates, recommendation from vendors, consultants, and licensors. F. Discusses, coordinates and resolves problems with personnel throughout Aramco and subsidiaries and with outside of company organizations. Acts as technical consultant when required. G. Recommends new installations or modifications to improve existing facilities and standardization within broad fields of endeavor. Estimates costs, prepares justifications and completes expenditure requests as required. H. Reviews work of engineers directed. Checks that reports are written according to established methods of good report presentation. Takes recommendations for further study or report changes. Approves reports for transmittal to supervisor. I. Has working knowledge of Saudi Aramco Standards and Specifications to review and provides consultation to proponent and project representatives related to their interpretation/ application of the standards in his area of expertise. J. Develop scope and description of technology items, and leads the implementation and operation of developed solutions in the field. Minimum Requirements EDUCATION: B.S. in Engineering. EXPERIENCE: Nine (9) years, preferably in the oil industry or similar process industry, such that the incumbent is clearly recognized as an expert in his field. Thorough knowledge of engineering standards, practices, and project planning and execution. Also, Knowledge of materials procurements , projects execution planning, and work planning systems (SAP). LANGUAGE REQUIREMENTS: Very good English language skills. OTHER: Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Aramcos Codes, Standards and Specifications, competent in the use of PC applications (MS Office suite or equivalent). Maintenance Planner I Duties and Responsibilities A. Supervises all Maintenance Planners in the Division. B. Consolidates weekly, monthly and yearly monitoring charts prepared by all Maintenance Planners into a Divisional Summary. C. Identifies all materials, tools, equipment, and special preparations required for each job step. Must have a good knowledge of Saudi Aramco Materials System in SAP, including use of the SAMS Catalog, requisitioning of SAMS stock items and Direct Charge materials use of surplus materials, returning surplus and excess materials to the Storehouse and all related SCMM Procedures. Ensures that materials are on-site prior to scheduling the job. Ensures that surplus and excess materials are returned to the proper materials handling personnel for eventual return to the Storehouse. D. Provides the foremen with a completed package for successful execution of maintenance work at min cost. E. Prepares regular and special analyses of manpower and backlog data for the Superintendent and recommends allocation of manpower resources to maintain the highest possible activity levels in the Division while meeting Maintenance Goals. F. Reviews the Whole Job Standards (WJSs) developed by Divisional Maintenance Planners and by other outside Maintenance Planners for completeness, accuracy and applicability to the Divisions needs. G. Revises those WJSs needing changes, and maintains an index of WJSs for the Division. H. Is the Divisional expert in the proper application of the Aramco Maintenance Work Control System and applicable Computerized Maintenance System data files. The incumbent conducts periodic refresher training for all personnel with the use of these systems, and for all Trainees who have been assigned to maintenance planning. I. Coordinates with counterparts in other Divisions and with the Maintenance Systems Division to keep current with latest systems developments and to provide the Divisions input to the Corporate policy-making process. J. Monitors, maintains and evaluates maintenance performance and activities for the Division, utilizing data provided by the Maintenance Planners. K. Recommends corrective actions based on the indicators and coordinates productivity studies within the Division. L. Tracks manpower backlog trends and recommends strategies to balance overall manpower requirements. M. Recommends contracting action for supplementary manpower as deemed necessary. N. Attends coordination meetings to help formulate maintenance policies in his area of expertise. O. Ensures that materials are received prior to scheduling the job. P. Daily review of all released maintenance orders material reservations ,committed materials and performs MIGO_GI prior to scheduling the work. Q. Checks, received, store materials and issue to craftsmen assigned for Orders on daily schedule work. R. Request crane/trailer and ensures contracts readiness or other resources required on the daily scheduled jobs. S. Lists, edits and checks all issued minor maintenance tickets (MMT) and plans/schedules work. T. Plans major jobs with the assistance & directions of senior planner. U. Attends meeting & responsible for making the weekly and the daily work schedules. Updates maintenance order statuses as to whether jobs are workable or unworkable, percent completion, estimated completion date, reasons for delay and all other pertinent information. V. Generates SAP reports or BW maintenance reports for performance or tracking analysis. Minimum Requirements: Thirteen (13) years varied craft experience (experience in more than one major craft is desirable) Must be thoroughly acquainted with the maintenance work of a division. Possess a good working knowledge of Critical Path Scheduling. Must be a recognized expert in Saudi Aramco Maintenance Work Control procedure and the use of Saudi Aramco Computerized Maintenance Management Systems (SAP Plant Maintenance Module). Must have a good working knowledge of Saudi Aramco Materials System on SAP, including use of the SAMS Catalog, requisitioning of SAMS stock items, requisitioning of Direct Charge materials, use of surplus materials and procedures for returning surplus and excess materials to the Storehouse. Must possess a valid Saudi Arab Government drivers license. Draftsman II & III Duties and Responsibilities: A. Drafts engineering drawings from detailed sketches and notes, working on a CADD workstation (Micro station). B. Modifies or corrects drawings working from detailed instructions. C. Converts digitized drawings to CADD by inserting graphic vectors. D. Assists in measuring and recording information during site visits. E. Prepares sketches to Saudi Aramco drafting standards working from site sketches or data. F. Assists in material take-offs. G. Uses iPlant system and uses spread sheets and word processing software for drawing-related take-offs. H. Refers to the Saudi Aramco Drafting Manual, the Engineering Procedures, to resolve questions of drawing standards. I. Performs additional drafting-related duties as required. Minimum Requirements: Five (5) years’ work experience including at least two years as Draftsman III. Ability to communicate in spoken and written English.
Posted on: Sun, 29 Jun 2014 06:49:10 +0000