See how to produce combustible oil. I intended to make nano coated copper wires, I noticed the unexpected formation of a considerable amount of oil, which was formed on the top of the caustic bath with copper wires. Please also read the description of the video. I started a new nano-coating batch of copper wires three days ago. The process according to M. T. Keshe technology is simple. In a plastic container I placed a couple of pieces of bottle necks from Coke bottles and a piece of aluminum of about 1 gram. I added about 50 grams of caustic soda flakes NaOH, and 100 milliliters of potassium hydroxide KOH solution of 25% dilution, commonly sold as barbecue cleaner. This barbecue cleaner also contains under 5% surfactants and under 9% phosphates. Then I placed a piece of zinc coated chicken mesh with purpose to provide an electrically conductive medium. Then I added the batch of cleaned, acid etched and washed copper wires, and I added boiling water until that filled the container. I have to mention protective gloves, protective goggles and protection for face and cloths are used here for safety of the caustic vapors sprayed out by the violent reaction of the caustic with the water. The aluminum reacting with the caustic soda also makes plenty of atomic, native hydrogen in a violent reaction, therefore such experiment shall be done with maximum care for safety, and at a well ventilated place, and no open fire around. Then I placed the lid of the container without closing it tightly, to allow the gas to come out freely. Once the gas creation stopped, I capped the container firmly, and I placed it in a safe place for a couple of days, to let the slow nano coating reaction develop. After three days I checked the container, willing to take out the copper wires and place them into another container for the next step, the oxidation, when for my surprise I discovered an 8 mm thick layer of oil-like material floating on the top of the caustic solution. I extracted some of that oil as a sample for future tests. I checked, that the oil looking material floats also on tap water, and not just on the caustic solution. I left the copper samples into the liquid, to see whether more oil will be produces during the next week, or not. Then I made a burning test, that you can see in this video. None of the materials I put into the container are combustible, yet a combustible oil was formed. I am addressing here first of all those, who are familiar with experiments with nano coated copper wires and with the new Keshe technologies. Whats your opinion, or hypothesis, what can be that oil that was formed in this process? What phenomena lies behind the formation of that oil? Was that oil formed from the carbon contained in the plastic material (PP and PET) of the container and hydrogen and oxygen of the liquid solution? What energies made possible such recombination of materials? All constructive ideas are welcome! video made on 2014 08 23 10 44 45 youtu.be/Di6exrT0uTk
Posted on: Sat, 23 Aug 2014 12:10:58 +0000
Trending Topics
Recently Viewed Topics
© 2015