THIN CLIENT (NCORE) INSTALLATION: PROCEDURE: (A): 1. INSTALL CD OVER THE SYSTEM WHICH YOU WANT TO WORKS AS SERVER. 2. FOR INSTALLATION, INSERT CD IN CDROM DRIVE. 3. OPEN MY COMPUTER. 4. DOUBLE CLICK CDROM DRIVE. 5. SELECT 600/900 FOLDER AND OPEN IT. 6. RUN SETUP FROM THERE. 7. AFTER COMPLETION, GO TO START – PROGRAM- SELECT INSTALLED RECENTLY OPTION. 8. IN SELECTED OPTION, OPEN CONSOLE. 9. IN CONSOLE WINDOWS, GO LEFT PANE AND SELECT USER. 10. MOVE TO RIGHT PANE, CREATE AS MUCH USER DEPENDING ON THIN CLIENT TO BE CONNECTED IN SIMILAR FASHAN AS YOU DO IT IN WINDOWS SERVER 2003. 11. CLOSE THE CONSOLE WINDOW AND OPEN MY COMPUTERS PROPERTITES. 12. SELECT REMOTE TAB AND ADD CREATED USER FROM THERE BY SEARCHING THEM, SO THAT THEY CAN ACCESS THE SERVER. PROCEDURE: (B): 1. MAKE ON THE THIN CLIENT AND WAIT TILL THE CONNECTING SCREEN APPEARS. 2. SELECT SETTING TAB ABD DOBLE CLICK OVER THERE. 3. SUPPLY PASSWORD (123). 4. GO TO NETWORK TAB, AND CLICK OVER THERE. 5. DEFINE STATIC IP ADDRESS, SUBNETMASK, AND GATEWAY AS PER THE SERVER. TAKE CARE THAT ALL IP ADDRESSES MUST BE OF THE SAME CLASS AND UNIQUE. 6. RESTART THE THIN CLIENT. 7. FROM CONNECTING SCREEN, CLICK OVER CONNECT, GO TO OPTION, DEFINE THERE SERVER IP ADDRESS AND CREATED USER NAME & PASSWORD AND LASTLY DOMAIN (WORKGROUP). AND SAVE IT. 8. CLOSE OPTION TAB, CLICK OVER CONNECT AGAIN, OPEN SAVE D INFO AND SUPPLY PASSWORD. 9. NOW YOUR THIN CLIENT MUST GET CONNECTED WITH THE SERVER AND YOU ARE ABLE TO ACCESS THE SERVER RESOURCES. IF ANY PROBLEM ARRIES , RUN THE CRACK ON SERVER TO RESOLVE THE ISSUE.
Posted on: Sat, 24 Aug 2013 03:09:02 +0000