Tea da Jasper te hian tha hi an ti bawk sia he lamah hian ti nghek mai teh ang :D We have lots of queries for our beloved Redmi 1s which are very basic and are asked repeatedly. So heres a Frequently Asked Question divided in to sections Hardware and MIUI. Hardware Q1: Does Redmi 1S support OTG? Why cant I read my flash drive using OTG? A: Yes, Redmi 1S supports OTG function. OTG stands for “On The Go”, which means you can connect a standard mouse, keyboard, pen drive, etc. into your Mi phone via an OTG cable. Please note that Mi phones support only FAT32 flash drives. If you are unable to read your flash drive: 1. Check whether your flash disk follows the FAT32 file system. 2. If it is not FAT32, set it to FAT32 on your PC, and then use it with your Redmi 1S. Q2: Does Redmi 1S have background light for the navigation keys? A: There is no background light in the Redmi 1S. But the navigation keys have an anti-flare coating, which reduces power consumption and ensures visibility even in weak lighting conditions. Q3: Why is there only 6.14GB of storage available on my Redmi 1S, instead of the stated 8GB? A: Of the 8GB ROM provided, 1.7GB is used up by System Files, leaving approximately 6.3GB for phone storage (virtual SD card). Small differences (like the one you see) may occur owing to system upgrades. Total System occupation Virtual SD card (Storage) Extension SD card Redmi 1S 8GB 1.7GB 6.3GB 64GB (max) The Redmi 1S can support a larger storage space (64GB max) by means of an extension SD card. You may copy data from the virtual SD card to the extension SD card when the storage space of the former is used up. Q4: Why does my Redmi 1S overheat during operation? A: Owing to their enhanced configuration (CPU, GPU, etc.), all smartphones generate heat while playing games, watching videos, operating apps, and so on. The heat dissipation of Redmi 1S is controlled so as to make it as comfortable for you as possible. If however you feel the heat is severe, please contact your nearest service centre for help. Q5: What network type does Redmi 1S operate on? A: Redmi1S features dual SIM dual standby, which lets you send and receive calls and SMS from two numbers without having to swap SIM cards. Slot 1 supports WCDMA /GSM and Slot 2 supports GSM. Q6: If I am communicating using SIM 1, is there a waiting prompt when there’s an incoming call on SIM 2? A: Yes. Although Redmi 1S supports dual SIM cards, it is single-channel design. While you are communicating using one SIM card, the other SIM card cannot receive calls and there will be voice prompt saying, “Sorry! The subscriber you have dialled cannot be connected at the moment”. Messages are received later as well. Q7: Does Redmi 1S support MHL (Mobile High-Definition Link)? A: The Redmi 1S doesn’t support MHL. As the development and popularity of wireless connections like DLNA (Intel, Microsoft and SONY), Airplay (iphone) and Wi-Di (between TV and PC) increases, wired connections are being gradually replaced by wireless. However, Redmi 1S can realize wireless screen-share through Miracast (on Mi TV). Q8: How can I locate the IMEI on my phone? A: There are three ways in which you can do this. 1. Check the package for the IMEI number. We advise all our customers to keep the package and note the IMEI number at the very beginning. 2. Go to “Settings” >> “General Settings” >> “About Phone” >> “Status” >> “IMEI” 3. Dial *#06# (this applies to phones of all brands, not just Xiaomi) Q9: Where is the notification light located, and what is its function? A: The notification light of Redmi 1S is located below the Home button. It will be blinking when there is a missed call or message, and when the phone is charging. If the phone is very low on power, the light will shine all the time. The colour of the notification light is different for each status. You can change the notification colour as you like. Go to “Settings” >> “General Settings” >> “Notification Light” >> “Pulse Notification Light”. Q10: Why can’t I hear the caller’s voice when I use a non-Xiaomi headset? A: There are two industry standards for the 3.5mm headset: CTIA and OMTP. The Redmi 1S phone and headset are matched with the CTIA standard. So, if you are using a non-Xiaomi headset, it will not work. You may try out the headset with another phone or device. Or you can dial *#*#6484#*#* to try and detect the headset. If the headset is not detected, please contact the nearest service centre for help.
Posted on: Thu, 06 Nov 2014 14:02:16 +0000
Trending Topics
Recently Viewed Topics
© 2015