c= Steps == # Get your supplies. They are listed below.[[Image:Make an Electroscope Step # Feed the wire through the hole in the rubber stopper.[[Image:Make an Electroscope Step 2.jpg|center|550px]] # Bend a couple of closely spaced U bends or loops in the end of the wire that you put through the hole. Needle nose pliers would be useful.[[Image:Make an Electroscope Step 3.jpg|center|550px]] # Twist or twirl the other end of the wire to make a stop to keep the wire from falling through.[[Image:Make an Electroscope Step 4.jpg|center|550px]] # Carefully hook the staples over the U bends or loops so that they hang freely. The staples need to be able to swing freely on the wire- they are draped over the wire, not crimped on.[[Image:Make an Electroscope Step 5.jpg|center|550px]] # Carefully lower the whole thing (stopper, wire, and staples) into the glass flask.[[Image:Make an Electroscope Step 6.jpg|center|550px]] # When a charged object (such as a balloon you rubbed on your hair) is brought near to the exposed end of the wire, the staples will swing away from each other![[Image:Make an Electroscope Step 7.jpg|center|550px]]
Posted on: Tue, 19 Nov 2013 09:22:41 +0000
Trending Topics
Recently Viewed Topics
© 2015