আলো আসলে light off আলো চোলে - TopicsExpress



          

আলো আসলে light off আলো চোলে গেলে light on circuit dayagram স্বয়ংক্রিয় দেউড়ি আলো. ইউটিলিটি Gadget.14 এখানে একটি সহজ স্বয়ংক্রিয় দেউড়ি আলো একটি LDR দ্বারা নিয়ন্ত্রিত হয় এবং Triac. এটি স্বয়ংক্রিয়ভাবে সন্ধ্যায় সক্রিয় এবং বন্ধ সক্রিয় সকালে. সার্কিট খুব সহজ এবং Mains ভোল্টেজ ব্যবহার করে সরাসরি. এটা টাইপ অ্যাডাপ্টারের বাক্সে একটি প্লাগ মধ্যে লেখা যেতে পারে. 1. ক্যাপাসিটর বিদ্যুৎ সরবরাহ প্রায় 12 230 ভোল্ট এসি পরিবর্তন ভোল্ট ডিসি. 2. আলো LDR উপর বৃক্ষের পতন হয়, এটা সঞ্চালন, Triac তাই পেতে হবে না গেট বর্তমান এবং বন্ধ থাকবে 3. LDR উপর হালকা গুটিয়ে ফেলে, তার প্রতিরোধ ক্ষমতা বৃদ্ধি এবং Triac ভোল্টেজ এবং আগুন triggering হয়. ল্যাম্প তারপর সক্রিয় করে. 4. ল্যাম্প একটি ভাস্বর বাল্ব হতে হবে. সিএফএল, প্রতিপ্রভ বাতি তারা মে থেকে ইত্যাদি Triac নিয়ন্ত্রিত সার্কিট ব্যবহার করা যাবে না মিট্মিট্ ও ক্ষতি. 5. সূর্যালোক পাওয়া যায় যেখানে বাড়ির বাইরে ইউনিট স্থাপন করুন. বাতি থেকে হাল্কা LDR উপর পড়া উচিত নয়. সতর্কতা: উচ্চ ভোল্টেজ সার্কিট এবং শক হ্যাজার্ড. না আপনি এসি পরিচালনার অভিজ্ঞতা হয়, যদি না এই সার্কিট নির্মাণ করা সার্কিট. 230 ভোল্ট এসি সরাসরি বর্তনী মধ্যে প্রবাহিত হয়. না এটি mains সাথে সংযুক্ত করা হয় যখন স্পর্শ বা কষ্ট অঙ্কুর. বিদ্যুৎ এটা শুধুমাত্র একটি প্লাস্টিকের ক্ষেত্রে পরিক্ষেপ পর. For english Automatic Porch Light. Utility Gadget.14 Here is a simple Automatic Porch light controlled by an LDR and Triac. It automatically turns on in the evening and turns off in the morning. The circuit is too simple and uses Mains voltage directly. It can be enclosed in a plug in type adapter box. 1. Capacitor power supply converts 230 volt AC to around 12 volt DC. 2. When light falls on LDR, it conducts , so Triac will not get gate current and remains off 3. When the light on the LDR ceases, its resistance increase and Triac gets triggering voltage and fires. Lamp then turns on. 4. Lamp should be an incandescent bulb. CFL, Fluorescent lamp etc cannot be used in Triac controlled circuits since they may flicker and damage. 5. Place the unit outside the home where sunlight is available. Light from the lamp should not fall on the LDR. Caution : High voltage Circuit and Shock Hazard. Do not construct this circuit unless you are experienced in handling AC circuits. 230 Volt AC is directly flowing into the circuit. Do not touch or trouble shoot when it is connected to mains. Power it only after enclosing in a plastic case.
Posted on: Mon, 29 Dec 2014 14:21:21 +0000

Trending Topics



Recently Viewed Topics




© 2015