The Dos & Don’ts of Checking and Fixing a Battery Leak Batteries are split into two types: Primary cells (disposable) and secondary cells (rechargeable). Primary cells are made from Alkaline, Zinc, and Lithium-based physics. Secondary cells, are made up of Lead-Acid, Nickel, and Lithium-ion physics. These types of batteries can be reused, making them more cost effective and environmentally-friendly. The main difference between industrial batteries vs. regular batteries are minimal. Industrial batteries are constructed with heavy plates to disperse a longer discharge period. They can more importantly, be refurbished because the plates are comprised of lead and can be formulated to reinstate the chemical reaction. Another difference is weight. Industrial batteries can weigh anywhere from 450 upwards to 20,000 pounds. Industrial batteries are large batteries often used in aircraft or industrial machinery. Some are manufactured with gel instead of using liquid acid materials. The battery is a sealed battery type to prevent the Battery Leaking potentially harmful materials. When charging a gel battery, it must be done slowly, or bubbles will form in the gel. Also done incorrectly, the seal could break and the gel could spill out. Though the material is usually comprised of silica, and the acids are sealed it can, however, create environmental issues just like any other battery could. However, gel batteries are also susceptible to gases building up or the cells breaking down, acid can only become a safety hazard, when the cells have broken down to the point that the gel material does not encase the acids. Industrial batteries demand the education and know-how of experts. If your Battery Leaking is draining the battery or it’s not holding a charge after charging, it may call for reconditioning. Only certified and trained persons have the know how to fix industrial batteries. Furthermore you should contact a certified industrial battery reconditioning organization to collect your industrial batteries for testing and repair; this should be done in an industry approved environment. Some of the best guidance pertaining to the care of batteries is in conjunction with what should not be done. Do not drain the battery completely, or drain the battery to more than 80 percent; this is known as a deep discharge. Deep discharge is one of the major causes of shortened battery life and can cause Battery Leaking. Furthermore, do not let a drained battery sit for a prolonged period of time before recharging. However, if you will be storing a battery for a prolonged period of time, charge it beforehand, also regularly check the charge during the storage period. You could also attach it to an automatic trickle charger if you are going to be storing it for an extended period of disuse.
Posted on: Thu, 19 Jun 2014 23:13:50 +0000
Trending Topics
Recently Viewed Topics
© 2015