The slider set up I use is based around a 3SSG djk bodied peacock. Its a semi loaded float which helps keep the float tight to the bulk during casting, reducing the chance of a tangle. One thing worth mentioning about the float, is that I give the swivel eye at the base a little squeeze. This reduces its size just enough to stop at the knot, yet still allow the line to pull through smoothly. You can use a tiny bead above the float, but the less components the better in my book. When we move into winter, and the bites become a little more finicky, I would look to use one of the carbon insert wagglers as they offer more sensitivity. I mount this on a 3lb main line, as Im not casting to the horizon. But if I were to use a heavier float and give it the old heave hoe, I wouldnt hesitate stepping upto a 5/6lb main line. For my stop knot that I use to set the float at the required depth, I use a diameter .19 power line and leave the tags around two inches in length (see picture bellow). For the bulk weight I try and use ollivetes where possible, reducing the amount of problematic split shots on the line, as there is nothing worse than having weights pinging off all the time. In the case of this float I have used a 4grm Drennan inline jobbie. To hold this in place, I use my trimming shot bellow, and a rubber float stop above, again trying to keep line damage to a minimum. Also the rubber bead acts as a buffer between the float and bulk. Below this I have either three or four number 8 stotz, I use these because again I really cant be doing with weights coming of during fishing, and these are by far the best Ive ever used. I butt these up against a small double barrel swivel forming my telltale dropper. I do this because with this style of float it will take too long, and you would struggle to see smaller shots register on the float tip. In winter with a more a more sensitive float I would taylor the shotting to suit the bites, but not with this set up. A small swivel is absolutely critical, as you may have to reel back over long distances it reduces line spin to an absolute minimum. One of the most important things about the set up is the position on your bulk in relation to your dropper and hook. I always use a twelve inch hooklength when using a waggler, so you must ensure your main bulk and dropper are at least 18 inches apart. This prevents the hook from catching above the the main weight, and believe me, it will! To help prevent tangles it is best to use the reels line clip, but you must ensure that you hit that clip every time!!!!!! If not, you will experience some of the most intricate knots and tangles you will every see. By over casting and then clipping up, you can sink your rod tip under the water, and then wind in at least ten full turns of the handle. This works in two ways: Firstly, you are ensuring that the line from float to rod tip is full submerged away from any wind and skim. Secondly, you will be retrieving you float back to the same distance every time, ensuring your fishing bang on the feed, winner!
Posted on: Thu, 23 Oct 2014 18:17:27 +0000
Trending Topics
Recently Viewed Topics
© 2015